Manual Parkside MPKZ 2000 A1 - IAN 315340 (page 9 of 68) (English, German, Dutch, French)

706349

Zoom out

Zoom in

1/68

4 GB/IE/NI

4. Intended use

The sliding compound mitre saw is designed to crosscut wood

and plastic respective of the machine’s size. The sliding cross

cut mitre saw is not designed for cutting ﬁrewood.

Warning! Do not use the sliding cross cut mitre saw to cut

materials other than those speciﬁed described in manual.

Warning! The supplied saw blade is intended exclusively for

sawing the following materials:

wood, wood derived products (MDF, chipboard, plywood,

blockboard, hardboard, etc.), wood with nails and 3mm mild

steel plates.

Note: Wood containing non-galvanised nails or screws can

also be safely cut when carefully handled.

Note: Do not use the saw blade to cut galvanised materi-

als or wood containing galvanised nails. Do not use the saw

blade to saw ﬁrewood!

The equipment is to be used only for its prescribed purpose.

Any other use is deemed to be a case of misuse. The user / op-

erator and not the manufacturer will be liable for any damage

or injuries of any kind caused as a result of this.

The equipment is to be operated only with suitable saw blades.

It is prohibited to use any type of cutting-oﬀ wheel.

To use the equipment properly you must also observe the safety

information, the assembly instructions and the operating instruc-

tions to be found in this manual.

All persons who use and service the equipment have to be

acquainted with this manual and must be informed about the

equipment’s potential hazards. It is also imperative to observe

the accident prevention regulations in force in your area. The

same applies for the general rules of health and safety at work.

The manufacturer will not be liable for any changes made to

the equipment nor for any damage resulting from such chang-

es. Even when the equipment is used as prescribed it is still im-

possible to eliminate certain residual risk factors. The following

hazards may arise in connection with the machine’s construc-

tion and design:

• Contact with the saw blade in the uncovered saw zone.

• Reaching into the running saw blade (cut injuries).

• Kick-back of workpieces and parts of workpieces.

• Saw blade fracturing.

• Catapulting of faulty carbide tips from the saw blade.

• Damage to hearing if ear-muﬀs are not used as necessary.

• Harmful emissions of wood dust when used in closed rooms.

Please note that our equipment has not been designed for use

in commercial, trade or industrial applications. Our warranty

will be voided if the equipment is used in commercial, trade or

industrial businesses or for equivalent purposes.

5. Safety information

General safety information for power tools

m WARNING! Read all safety warnings, instruc-

tions, illustrations and technical data provided

with this power tool. Failure to follow the warnings and in-

structions may result in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future refer-

ence.

The term “power tool” used in the safety instructions refers to

mains powered power tools (with power cord) and cordless

power tools (without power cord).

Workplace safety

a) Keep your workplace clean and well illumi-

nated.

Disorderliness and poorly illuminated workplaces may

Iead to accidents.

b) Do not operate the power tool in explosive

atmospheres with inﬂammable liquids, gases

or dust.

Power tools generate sparks which may ignite dust or va-

pours.

c) Keep children and other persons away from

the power tool during operation.

You may lose control of the tool if you are distracted.

Electric safety

a) The plug of the power tool must ﬁt into the

socket.

Do not modify the plug in any way. Do not use adapter

plugs together with grounded power tools. Unmodiﬁed

plugs and matching sockets reduce the risk of electric shock.

b) Avoid body contact with grounded surfaces

such as pipes, radiators, ovens and refrigera-

tors. There is an increased risk of electric shock

if your body is grounded.

c) Keep power tools away from rain or humidity.

Water permeation into the power tool will increase the

risk of electric shock.

d) Use the cable solely for its intended purpose.

Do not use the cable to carry or hang up the

power tool or to pull out the plug from the

socket.

Keep the cable away from heat, oil, sharp edges or mov-

ing machine parts. Damaged or twisted cables increase

the risk of electric shock.

e) When working outdoors with power tools,

only use extension cords which are suited for

outdoor areas.

Using extension cords suited for outdoor applications re-

duces the risk of electric shock.

f) lf the operation of power tools in a humid en-

vironment cannot be avoided, you must use a

residual current circuit breaker.

The use of a residual current circuit breaker will reduce the

risk of electric shock.

Parkside mpkz2000...when loosening saw blade Allen nut is it turned clockwise or anticlockwise Submitted on 19-2-2022 at 10:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside MPKZ 2000 A1 - IAN 315340 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside MPKZ 2000 A1 - IAN 315340 Manual

Product: