Manual Parkside MPKZ 2000 A1 - IAN 315340 (page 8 of 68) (English, German, Dutch, French)

706349

Zoom out

Zoom in

1/68

3GB/IE/NI

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

we hope your new tool brings you much enjoyment and suc-

cess.

NOTE:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,

• Application other than speciﬁed,

• A breakdown of the electrical system that occurs due to the

non-compliance of the electric regulations and VDE regula-

tions 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating instructions

before installing and commissioning the device.

The operating instructions are intended to help the user to

become familiar with the machine and take advantage of its

application possibilities in accordance with the recommenda-

tions.

The operating instructions contain important information

on how to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, reduce

downtimes and how to increase reliability and service life of

the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt

and moisture. Read the instruction manual each time before

operating the machine and carefully follow its information.

The machine can only be operated by persons who were

instructed concerning the operation of the machine and who

are informed about the associated dangers. The minimum age

requirement must be complied with.

In addition to the safety instructions contained in this operat-

ing manual and the speciﬁc regulations of your country,

the technical rules generally accepted for the operation of

machines of the same type must be observed.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety

information.

2. Device description (ﬁg. 1-21)

1. Handle

2. ON/OFF switch

3. Lock switch

4. Machine head

5. Moving saw blade guard

6. Saw blade

7. Clamping device

8. Workpiece support

9. Set screw for workpiece support

10. Table insert

11. Locking handle

12. Pointer

13. Scale

14. Rotary table

15. Fixed saw table

16. Stop rail

16a. Movable stop rail

16b. Set screw

17. Chip collection bag

18. Scale

19. Pointer

20. Set screw for drag guide

21. Drag guide

22. Set screw

23. Locking bolt

24. Screw for cutting depth limiting

25. Stop for cutting depth limiting

26. Adjusting screw (90°)

27. Adjusting screw (45°)

28. Flange screw

29. Outer ﬂange

30. Saw shaft lock

31. Inner ﬂange

32. Laser

33. ON/OFF switch laser

34. Speed regulation switch

35. Latched position lever

36. Tilt protection

37. Adjusting screw

38. LED working light

A.) 90° stop angle (not supplied)

B.) 45° stop angle (not supplied)

C.) Allen key, 6 mm

D.) Allen key, 3 mm

E.) Philips head screw (Laser)

3. Scope of delivery

• Sliding compound mitre saw

• 2 x Clamping device (7) (preassembled)

• 2 x Workpiece support (8) (preassembled)

• Chip collection bag (17)

• Allen key 6 mm (C)

• Allen key 3 mm (D)

• Operating manual

Parkside mpkz2000...when loosening saw blade Allen nut is it turned clockwise or anticlockwise Submitted on 19-2-2022 at 10:05
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside MPKZ 2000 A1 - IAN 315340 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside MPKZ 2000 A1 - IAN 315340 Manual

Product: