464970
13
Zoom out
Zoom in
Previous page
1/79
Next page
13
t
+ www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
SANDING PROCEDURE
With the sander switched on, bring it into contact with the workpiece and move it forward carefully.
Continue sanding using overlapping strokes parallel to the belt track. Always work in the direction of
the grain to avoid undesirable transverse sanding marks.
VACUUM EXTRACTION OF DUST
Wear a dust mask! Vacuum extraction of dust makes disposal easier, prevents the build up of
stubborn dust deposits and keeps dust out of the air you are breathing. It will also prevent sanding
debris from getting on to the workpiece surface and leaving grease or burn marks.
Pull the dust collection bag
µ over the supplied adapter and attach it to the dust extraction spout .
The stirrup-shaped adapter ensures that the dust collection bag is fully opened out to accept the
sanding dust (see Fig.
). Empty the dust collection bag regularly.
You can also attach a domestic vacuum cleaner to the dust extraction spout
(see Fig. ). Do not
use the domestic vacuum cylinder to extract an explosive mixture of dust and air
.
If there is an explosive mixture of dust and air you must use a vacuum device especially intended for
that purpose.
ATTENTION - DANGER OF FIRE: Do not use vacuum dust extraction (dust bag or vacuum cleaner)
when sanding metals (flying sparks).
NOTE
Always move the belt sander over the workpiece surface with both hands using even movements.
The auxiliary handle
³ can be adjusted or removed to allow you to sand those difficult-to-reach
places.
SELECTING BELT SPEED AND SANDING SHEET
You can select the belt speed using the belt speed selector wheel », even whilst the sander is
running. The optimum belt speed depends on the workpiece and the workpiece material. Always
confirm the best speed by carrying out a small test. The following table lists some recommended
values to help you determine the optimum speed.
Material / type of work Coarse sanding (grit) Fine sanding (grit) Speed
Softwood 060 240 high (5-6)
Hardwood 060 180 high (5-6)
Plywood 060 150 high (5-6)
Removing paint/varnish 060 –– high (5-6)
13
manual PEBS 900 07.11.2003 11:39 Uhr Seite 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3115 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside KH 3115

Parkside KH 3115 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info