464970
12
Zoom out
Zoom in
Previous page
1/79
Next page
SWITCH ON CONTINUOUS MODE: Press the ON/OFF switch ´ and secure it in the pressed
position with the locking knob
¿
SWITCH OFF CONTINUOUS MODE: Press the ON/OFF switch ´ and then release it
TENSIONING/CHANGING THE SANDING BELT
ATTENTION: Before you carry out any work on the belt sander always pull the plug out of the
mains socket.
1) Release the tensioner for the sanding belt by turning the tensioning lever ¾ fully outwards
(see figure
). The belt holder is now open and sanding belt can be removed.
2) Next insert a new sanding belt or change the belt for one suitable for a different material or one
with a different grit.
IMPORTANT: The direction of the arrow on the inside of the sanding belt must agree with that on
sander housing (see Fig.
).
3) Fully tension the sanding belt – turn the tensioning lever I back into its initial position.
4) Lift up the sander and switch it on. Adjust the belt tracking by turning the adjuster screw
º until
the edge of the sanding belt is flush with and runs parallel to the slider plate.
Always make sure that the sanding belt does not cut into the housing. Check the sanding belt
regularly and re-adjust if necessary using the adjuster screw
º.
ADVICE ON SANDING
Always switch on the belt sander before making contact with the material and only then guide
the sander on to the workpiece.
USE LIGHT SANDING PRESSURE ONLY
Use the lightest possible pressure when sanding. The self-weight of the belt sander alone is quite
sufficient for good sanding performance.
In addition, by working this way you will achieve a smoother surface and use less energy.
MATERIAL REMOVED AND SURFACE FINISH
The amount of material removed by sanding and the quality of the surface finish achieved depend
on the belt speed and the grit size of the sanding belt (see section on “Belt speed and sanding
sheet”). The following basic rules apply: the higher the rpm/belt speed you use, the more material is
removed and the finer is the sanded surface.
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++ w
12
t
12
ƽ
manual PEBS 900 07.11.2003 11:39 Uhr Seite 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3115 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside KH 3115

Parkside KH 3115 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info