464970
11
Zoom out
Zoom in
Previous page
1/79
Next page
11
t
+ www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
IMPORTANT SAFETY ADVICE ƽ
· In addition, please read the advice in the accompanying booklet called "Safety advice" before using
the equipment for the first time.
· The PEBS 900 belt sander is designed for dry sanding of large surfaces of wood, plastic, metal and –
with increased removal rate – plaster and painted surfaces. The belt sander is only to be used for dry
sanding.
· If the mains cable becomes damaged or cut through whilst you are working, never touch the cable –
pull the plug out of the mains socket immediately. Never use electrical equipment with a damaged
mains cable.
· When working always keep the cable running away from the back of the machine.
· The belt sander should be connected to a suitable external vacuum suction device when sanding
wood for long periods and in particular when sanding materials that give rise to dusts that may be
hazardous to health. Wear a breathing mask, ear protectors and protective glasses.
· The sander is not to be used on materials containing asbestos.
· Secure the workpiece to be sanded if it is not stable under its own weight.
· Always make sure that the machine is switched off before you pull the socket out of the mains
socket.
· Switch on the belt sander first before you bring it into contact with the workpiece and lift the sander
off the workpiece before you switch it off.
· Do not continue to use a sanding belt if it is worn out or ripped.
· Avoid touching the moving sanding belt - danger of injury.
· Switch off the machine and let the belt come to a standstill before you place the sander down.
· Attention: sparks may be generated during use - danger of fire. Sparks may be generated when
metals are being sanded. You should therefore always be careful to ensure that no one is placed in
danger and no inflammable materials are kept near the working area.
· Use original spare parts and accessories to ensure the best performance from your sander.
USING THE SANDER FOR THE FIRST TIME
Note the mains voltage. The mains voltage must correspond with that shown on the sander rating
plate.
Equipment labelled as 230 V may also be used with 220 V.
SWITCHING ON AND OFF
You can select intermittent or continuous operation mode. For short busts of sanding use the
intermittent setting. For normal or longer periods of sanding we recommend the continuous setting.
Operation in your selected mode is as follows:
SWITCH ON INTERMITTENT MODE: Press the ON/OFF switch
´
SWITCH OFF INTERMITTENT MODE: Release the ON/OFF switch ´
Ꮯƭ
11
manual PEBS 900 07.11.2003 11:39 Uhr Seite 11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3115 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside KH 3115

Parkside KH 3115 User Manual - Dutch - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info