558597
15
Zoom out
Zoom in
Previous page
1/97
Next page
PARKSIDE
Charging the battery pack
Before inserting the battery pack into the charger or
removing it from the charger, always ensure the plug
is not in the mains socket.
Insert the battery pack so that it is firmly held in
the charger. Push the plug into the mains socket.
The red charging light indicates that charging
has begun. The red light will go out after about
1 hour.
The green charging light lets you know when
charging is complete and the battery pack is rea-
dy for use.
If you wish to charge a second battery pack, pull
out the plug from the mains supply and keep the
charger off for at least 15 minutes. Then you can
start to charge the second battery.
Note: If you do not remove the plug from the mains
socket before the second charging process starts
then the second battery cannot be charged.
ƽ Caution!
A new battery pack is not charged and must be ful-
ly charged before first use.
Never charge the battery pack again immediate-
ly after a fast charging process has been complet-
ed. This can give rise to the battery pack being
overcharged and a reduced life of the battery and
charger.
Switch off the charger for at least 15 minutes be-
tween charges by removing the plug from the
mains socket.
If you use a multiway socket adapter, unplug all
other electrical equipment from the adapter.
Checking the battery condition
You can check the condition of the battery with the
battery in place.To do this, press the button (refer to
Fig. D) on the battery indicator
. The remaining
charge is displayed.
All lights on = full power / battery fully charged
Perfectly designed –
the ergonomics package
The motor housing is aligned at an angle of approx. 12°
to the handle. This ensures that for typical working
and handling situations the drill is at the correct an-
gle to the workpiece surface. In this way you can
work precisely and much more effectively – try it out
yourself ...
The particularly generously-sized controls ቧቢ
make it particularly quick to adjust the way the tool
works to the suit the task in hand.
The SOFTGRIP handle reduces vibrations and
makes working with your drill more comfortable,
refer to Fig. A.
The integrated hand guard is another ergonomic
feature. It protects you from injuries,e.g.when you
are drilling.
Switch speeds – the 2 gear drive
In first gear (switch in setting: Screw) a speed
of up to approx. 500 rpm can be achieved. This
setting is intended for use with old screws and for
accessories.
In second gear (switch in setting: Drill/2) the
speed is up to approx. 1400 rpm for drilling.
Robust and strong – the motor
The powerful motor guarantees a high torque. It works
on 18 Volts, provides a maximum torque of 18 Nm
and reaches speeds of approx. 1400 rpm. The inte-
gral electric brake ensures the tool comes to a halt
almost immediately,so that you can work more safe-
ly and quickly.
Controllable – the torque selector
Before you start screwdriving you can set the torque
selector
in any of 16 torque settings to obtain the
desired torque.
Operation
16 GB
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 16
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3101 - PABS 18-2 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3101 - PABS 18-2 SL in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info