558597
13
Zoom out
Zoom in
Previous page
1/97
Next page
PARKSIDE
Cordless 2 gear drill driver
PABS18-2 SL
For drilling and screwdriving into wood,
plastic and metal
Before you use it for the first time, it is essential that
you make yourself fully familiar with the functions of
the equipment and find out how to handle electrically
powered tools. Please read the following operating
instructions carefully along with the enclosed
safety advice
ƽ. These instructions are to be con-
sidered as a constituent part of the product.
í Proper use
This device is designed for drilling and screwing in-
to wood, plastic and metal. Use the device only as
described and for the indicated purposes. Any other
use or modification shall be deemed improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or dam-
age arising from improper use.The tool is not intend-
ed for commercial use.
í Features PABS 18-2 SL
Screwdriver /drill selector switch
Spirit level
Battery condition indicator
Ventilation air inlet
Forward/reverse switch
ON/OFF switch
Button for unlocking the battery
Battery pack
Torque selector
Keyless chuck
Fast charger
(Charging time only 50-60 minutes)
Green charge check light
Red charge check light
Contact
í Technical data
Cordless 2 gear drill driver PABS 18-2 SL
Nominal no-load
speed 1
st
gear: n
0
0-500/min
-1
Nominal no-load
speed 2
nd
gear: n
0
0-1400/min
-1
Nom. d.c. voltage: 18 V
Chuck size: 1,0 - 10 mm
Max. drill diameter: Steel: 10 mm,
Aluminium:15 mm,
wood: 20 mm
Var. driver torque: 1 - 8 Nm
Max. drilling torque: 18 Nm
Sound level: 74.35 dB (A)
Vibration value: 2.5 m/s
2
Weight: 2100 g
Fast battery charger JDA-22K
Charging current: 2600 mA
Charging time: 50-60 minutes
Battery pack
Nom. d.c. voltage: 18 V
Battery capacity: 1500 mAh
Capacity: 27 Wh
Power consumption/Watt
The power consumption in watts changes with the
load. The measured power consumption during var-
ious types of use is e.g.:
in 2
nd
gear with a 3 mm
drill bit in softwood: 090 watts
in 1
st
gear with a 10 mm
drill bit in (ST37) steel strip: 215 watts
in 1st gear with a 20 mm
drill bit in softwood: 330 watts
Power output/Torque/Newton metres (Nm)
The maximum torque is 18 Nm (soft screwing). The
power consumption can reach over 1000 W.
Do not overload the drill! As the speed of the motor
drops,the speed of the fan reduces and this may lead
to the motor overheating.
Introduction/Safety
14 GB
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 14
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3101 - PABS 18-2 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3101 - PABS 18-2 SL in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info