558597
17
Zoom out
Zoom in
Previous page
1/97
Next page
PARKSIDE
so that swarf or drill dust can be removed and the
hole and tool is ventilated.
4. Secure or fix down the workpiece (if possible) in a
clamp or vice.
5. Mark the intended position of the hole
with a cen-
tre punch or a nail and select a lo
w drill speed.
6. Drilling in metal
: Use a metal drill bit (HSS). For the
best results, you should cool the bit with oil.Metal
drill bits can also be used to drill into plastic.
7. Drilling in stone
: Use a circular shafted masonry
drill bit with a hardened metal tip.
8. Drilling in wood
: Normally you should use a wood
drill with a centring point. For deep holes, use an
auger type bit. For large diameter holes, use a
forstner bit. You can screw small screws into soft
wood without the need for pre-drilling.
í
Maintenance and Cleaning
Do not allow any liquids to enter the tool. Use a
soft cloth to clean the housing. Never use petrol,
solvents or cleaning agents that might attack
plastic.
The ventilation openings must always be kept free.
í
Disposal
The packaging is wholly composed of environmen-
tally-friendly materials that can be disposed of at a
local recycling centre.
Please contact your local council office to find out
about disposal facilities for your worn-out appli-
ances.
Defective or exhausted batteries must be recycled in
accordance with Directive 91/157 EEC.
Please refer to the special safety advice in relation
to the charger and battery pack.
Return the battery and/or the equipment to the pro-
vided collection facilities.
í
Manufacturer's declaration
of conformity
We,Kompernaß Handelsgesellschaft mbH,Burgstr. 21,
D-44867 Bochum, Deutschland,hereby declare that
this product complies with the requirements of the
following EU directives:
EC machine guideline:
(89/392 EC), (91/368 EC), (93/44 EC), (93/68 EC)
EC low voltage regulations:
(73/23/EEC), (93/68 EEC)
Electromagnetic compatibility:
(89/336 EEC), (92/31 EEC), (93/68 EEC)
Applicable harmonised standards:
Description of the device:
Cordless 2 gear drill driver PABS 18-2 SL
Bochum, 31.01.04
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications in the course
of further development.
Operation/Cleaning/Disposal/Information
18 GB
www.kompernass.com
manual PABS 18-2 neu2 23.03.2004 10:42 Uhr Seite 18
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside KH 3101 - PABS 18-2 SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside KH 3101 - PABS 18-2 SL in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info