Manual Parkside IAN 90882 PHKSU 710 A1 (page 33 of 42) (English, German, Dutch)

745134

Zoom out

Zoom in

1/42

PHKSU 710 A1

3. Personal safety

a) Be alert at all times, pay attention to what

you are doing and act sensibly when you are

using an electric tool. Do not use an electric

tool if you are tired or under the inﬂ uence of

drugs, alcohol or medication. Even a simple

lapse of attention while using an electrical hand

tool can lead to serious injuries.

b) Wear personal protection equipment, and

always wear a pair of protective goggles.

Wearing personal protective equipment, such

as a dust mask, non-slip safety shoes, protective

gloves, helmet or ear protectors (depending on

the type and use of the electric tool), reduces

the risk of injuries.

c) Avoid unintentional operation of the device.

Ensure that the electric tool is switched oﬀ

before connecting it to the power supply, pick-

ing it up or carrying it. Carrying the electric

tool with your ﬁ nger on the ON/OFF switch or

connecting the device to the mains supply whilst

it is switched on can lead to serious accidents.

d) Remove any adjusting tools or spanners before

switching on the device. A tool or wrench

attached to a rotating device component can

cause serious injuries.

e) Avoid adopting an unusual posture. Ensure

you are standing ﬁ rmly and keep your balance

at all times. This gives you much better control

over the electric tool, especially in unexpected

situations.

f) Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep hair, clothing and

gloves away from moving parts. Loose cloth-

ing, jewellery and long hair can be caught in

moving parts.

g) If dust extraction and collecting equipment

can be ﬁ tted, ensure that it is attached and

used properly. The use of an extraction system

can reduce hazards caused by dust.

4. Use and handling of the electric tool

a) Do not overload the device. Use the appropri-

ate electric tool for the job at hand. Using

the correct electric tool, will allow you to work

better and more safely within the speciﬁ ed

performance range.

b) Never use an electric tool with a defective

switch. An electric tool that can no longer be

switched on or oﬀ is dangerous and must be

repaired.

c) Remove the plug from the socket before

making adjustments to the device, changing

accessories or putting the device into storage.

These precautionary measures prevent acciden-

tal starting of the device.

d) Store unused electric tools out of the reach

of children Do not allow persons who are not

familiar with the device or who have not read

these instructions to operate the device.

Electric tools are dangerous if used by people

who are inexperienced.

e) Look after electric tools with care. Check to

see whether moving parts are functioning cor-

rectly and are not jamming, whether parts are

broken or damaged and that the functioning

of the electric tool is not impaired. Arrange for

damaged components to be repaired before

using the device. Many accidents are caused by

poorly maintained electric tools.

f) Keep cutting tools sharp and clean. Care-

fully maintained cutting tools with sharp cutting

edges jam less often and are easier to control.

g) Use the electric tool, accessories, insertion

tools, etc. in accordance with these instruc-

tions. Take heed of the operating conditions

and the activities to be performed. The use

of electric tools for purposes other than their

intended purposes can result in dangerous

situations.

5. Service

a) Your electric tool should only be repaired

by qualiﬁ ed specialists using original spare

parts. This ensures that your electric tool

remains safe.

IB_90882_PHKSU710A1_LB1.indb 30IB_90882_PHKSU710A1_LB1.indb 30 22.07.13 14:1922.07.13 14:19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 90882 PHKSU 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 90882 PHKSU 710 A1

Parkside IAN 90882 PHKSU 710 A1 User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 90882 PHKSU 710 A1 Manual

Product: