745134
31
Zoom out
Zoom in
Previous page
1/42
Next page
28
PHKSU 710 A1
GB
CIRCULAR SAW PHKSU 710 A1
Introduction
Congratulations on the purchase of your
new product. You have decided to
purchase a high-quality product.
The operating instructions are part of this product.
They contain important information on safety, use
and disposal. Before using the product, familiarise
yourself with all operating and safety instructions.
Use this device only as described and only for the
specifi ed areas of application. Please also pass these
operating instructions on to any future owner(s).
Proper use
The circular saw (hereinafter “device”) is designed
for longitudinal, cross and mitre cuts in fi rmly
supported solid wood, chip board, plastics and
lightweight construction materials. It is also for
sawing lightweight and non-ferrous metals such as
copper piping or aluminium profi le. Please note that
the pre-assembled saw blade with its fl at teeth and
alternating chamfer makes it possible to achieve
a rough sectional cut at high resistance levels.
Any other uses or modifi cations to the device are
deemed to be improper usage and may result in
serious physical injury. Not for commercial use.
Depicted components
Safety lock-out
ON/OFF switch
Locking screw
Base plate
Wing screw
Guide fence slot
Auxiliary handle
Spindle lock button
Guide fence
Clamping fl ange
Clamping screw / plain washer
Lower blade guard
Release lever
Saw blade
Chip ejector
Vacuum adapter for dust extraction
Cutting depth scale
Allen key
Package contents
1 Circular saw
1 Guide fence
1 Vacuum adapter for dust extraction
1 Allen key
1 operating manual
Technical details
Nominal power input: 710 W
Rated voltage: 230 V ∼ 50 Hz
Idle speed: n
0
= 4.300 min
-1
Saw blade: Ø 110 mm x 1.65 mm x
Ø 20 mm, 24 teeth
Max. cutting depth: Wood 35 mm, plastic
35mm, exclusively light-
weight metal/non-ferrous
metal such as copper pipe
or aluminium profi le up to
max. 8 mm
Protection class: II /
Noise and vibration information:
Noise measurement determined in accordance
with EN 60745 The A-rated noise level of the
electric tool is typically:
Sound pressure level: 90.09 dB(A)
Sound power level: 101.09 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Evaluated acceleration, typically:
Hand/arm vibration a
h
= 3.808 m/s
2
Uncertainty K = 1.5 m/s
2
IB_90882_PHKSU710A1_LB1.indb 28IB_90882_PHKSU710A1_LB1.indb 28 22.07.13 14:1922.07.13 14:19
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 90882 PHKSU 710 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 90882 PHKSU 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 90882 PHKSU 710 A1

Parkside IAN 90882 PHKSU 710 A1 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info