Manual Parkside IAN 90882 PHKSU 710 A1 (page 35 of 42) (English, German, Dutch)

745134

Zoom out

Zoom in

1/42

PHKSU 710 A1

d) Support large panels or boards to reduce

the risk of the saw blade jamming and caus-

ing a kickback. Large panels or boards can

bend under their own weight. Panels/boards

must be supported on both sides: both in the

vicinity of the saw cut and also at the edge.

e) Do not use damaged or blunt saw blades. Saw

blades with blunt or misaligned teeth may cause

excessive friction in the saw cut and cause a saw

blade jam and kickback.

f) Before sawing, ensure that the fastenings

for the cut depth and cut angle settings are

tightened. If the settings change during sawing,

the saw blade can jam and cause a kickback.

g) Be particularly careful when sawing in existing

walls or other obscured areas. The saw blade

could get caught on a hidden object and cause

a kickback.

Function of the lower blade guard

a) Before every use, check to ensure that the

lower blade guard closes properly. Do not

use the saw if the lower blade guard cannot

move freely and does not close itself imme-

diately. Never jam or fasten the lower blade

guard open. If the saw accidentally falls to the

ﬂ oor, the lower blade guard may be bent or

damaged. Open the blade guard using the

release lever and ensure that it moves freely

and does not touch the saw blade or other

parts at any cutting angles or depths.

b) Check that the spring for the lower blade

guard is functioning correctly. Have the device

serviced before using it if the lower blade

guard and spring are not working properly.

Damaged parts, sticky deposits or accumulations

of chippings can cause the lower blade guard

to operate to slowly.

c) Open the lower blade guard by hand only

for certain cuts such as plunge or angle cuts.

Use the release lever to open the lower blade

guard and let go of this as soon as the saw

blade penetrates the workpiece. During all

other types of sawing work, the lower blade

guard should function automatically.

d) Do not leave the saw on the work bench

or the ﬂ oor if the lower blade guard is not

fully covering the saw blade. An unprotected,

still-spinning saw blade moves the saw in the

opposite direction to the cutting direction and

saws anything in its path. Always, take into

account that the saw blade takes some time to

stop spinning.

Supplementary notes

■ Do not use any grinding discs.

■ Use only saw blade with diameters correspond-

ing to the label on the saw.

■ When sawing wood or other materials which

may create dusts that are hazardous to health,

always connect a suitable, certiﬁ ed vacuum

extractor device.

■ Wear a dust mask when sawing wood.

■ Use only the recommended saw blades.

■ Always wear ear protectors.

■ Do not allow the teeth of the saw blade to overheat.

■ When sawing plastic, avoid melting the plastic.

Original accessories / additional

equipment

■ Only use accessories and additional equipment

that are speciﬁ ed in the operating instructions

and are compatible with the device.

Initial Operation

Fitting / changing the saw blade

Always pull out the plug from the mains before

changing the saw blade !

1. Set the cutting depth (using locking screw for

cutting depth scale

) to the minimum

position, 0 mm.

2. Swing the lower blade guard

back using

the release lever and put the device down.

3. Press the spindle lock button

(until it engages)

and use the Allen key to release the clamping

screw/washer

. Now remove the clamping

screw/washer

and the clamping ﬂ ange

(see also Fig. A).

IB_90882_PHKSU710A1_LB1.indb 32IB_90882_PHKSU710A1_LB1.indb 32 22.07.13 14:1922.07.13 14:19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 90882 PHKSU 710 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 90882 PHKSU 710 A1

Parkside IAN 90882 PHKSU 710 A1 User Manual - French - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 90882 PHKSU 710 A1 Manual

Product: