Manual Parkside IAN 89570 PDEXS 150 A1 (page 45 of 51) (French)

745094

Zoom out

Zoom in

1/51

45 GB

Safety instructions

Wear protective glasses!

Wear suitable clothing!

Hazards due to repetitive

motions

When using the sander or polisher for

work related tasks, the operator may

experience uncomfortable sensations

in hands, arms and the area of the

neck and shoulder or in other parts of

the body.

The operator should maintain a com-

fortable position whilst using this

sander or polisher, thereby ensuring

a secure grip and avoiding awkward

positions or positions making it diffi-

cult to maintain balance. The operator

should change his posture when working for

longer, to help avoid discomfort and fatigue.

If the operator experiences symptoms

such as persistently or repeatedly

feeling unwell, discomfort, palpita-

tions, pain, tingling, numbness, a

burning sensation or stiffness, these

warning signs should not be ignored.

The operator should report these to the em-

ployer and consult a qualified healthcare pro-

fessional.

Risks associated with

accessories

Unplug the sander or polisher before you change

tools or accessories.

Only use the size and types of accessories

and consumables recommended by the manu-

facturer of the sander or polisher.

Please avoid direct contact with the machine

tool during and after use, as it could have

heated up or have sharp edges.

Only use tools and accessories for the sander

and polisher that are designated for use by

the manufacturer of the sander and polisher.

Do not use cutting discs and machines for cutting.

It must be checked that the maximum operating

speed of the machine tool (flap discs, sanding

belts, fleece discs) is higher than the nominal

speed of the machine.

Please make sure that you affix the self-adhe-

sive abrasive sheets can be concentrically to

the mounting plate.

Hazards in the work

environment

Slipping, tripping and falling are the

main causes of injuries at the work-

place. Keep in mind that surfaces may have

become slippery during machine use, and

remember tripping hazards caused by the air-

or hydraulic hose.

Proceed with caution in unfamiliar

surroundings. There may be hidden dangers

due to electrical cables or other supply lines.

These machines for sanding and

polishing are not suitable for use in

explosive environments and are not

insulated against contact with electri-

cal power sources.

Verify that there are no electrical lines,

gas lines, etc. that may result in a hazard in

the event of them becoming damaged during

machine use.

Hazards due to dust

and vapours

Dusts and vapours generated by the

use of machines for sanding and pol-

ishing may result in damage to health

(e.g. cancer, birth defects, asthma and /

or dermatitis); it is imperative to perform a

risk assessment for these hazards and implement

the respective regulatory mechanisms.

The risk assessment should include dust

generated by machine use and the

dust already present in the area, which

is possibly being blown around.

89570_par_Druckluft_Exzenterschleifer_content_LB2.indd 45 29.05.13 17:33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89570 PDEXS 150 A1 in the language / languages: French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 89570 PDEXS 150 A1

Parkside IAN 89570 PDEXS 150 A1 User Manual - English, German, Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 89570 PDEXS 150 A1 Manual

Product: