Manual Parkside IAN 89570 PDEXS 150 A1 (page 43 of 51) (French)

745094

Zoom out

Zoom in

1/51

43 GB

Introduction

Introduction / Safety instructions

Sound pressure level: 95 dB(A)

Uncertainty K: 2.5 dB

Values determined in

accordance with:

EN ISO 15744

Weight: 970 g

Wear ear protection!

Vibration emission value = 16.98 m / s

uncertainty K = 1.34 m / s

Values determined in accordance with

EN ISO 28927-3, EN 12096

The noise levels given in these instructions have

been measured in accordance with a standardised

measurement procedure speciﬁed in EN ISO 15

744

and can be used to compare appliances. Diﬀerent

uses of the pressurised air tool give rise to diﬀerent

noise levels and in some cases they may exceed

the values given in these instructions. It is easy to

underestimate the noise load if the compressed air

tool is used regularly under those circumstances.

Note: For an accurate assessment of the noise

loads experienced during a particular work period,

you should also take into account the intervening

periods of time when the appliance is switched oﬀ

or is running but is not actually in use. This can re-

sult in a much lower noise load over the whole of

the work period.

Safety instructions

Please read all safety in-

formation and instructions. Failure to comply

with the safety advice and instructions can result in

severe injuries and / or damage to property.

For future reference keep all the safety

advice and instructions in a safe place.

Check the appliance for damage be-

fore bringing it into use. Do not use the

appliance if you discover any defects.

Keep children and other per-

sons away from the appliance

during use. Distractions can cause

you to lose control of the appliance.

Do not soak materials or areas that

are to be worked on with liquids con-

taining solvents.

Avoid sanding of paints containing

lead or other material detrimental to

your health.

Do not work on materials containing

asbestos. Asbestos is considered carcinogenic.

Avoid contact with the running sanding

disc.

Only use the appliance with the

attached sanding disc.

Always keep the device clean, dry

and free of oil or grease.

Keep your workplace clean. Material

mixtures are particularly dangerous. Aluminium

dust can burn or explode.

Secure the work-piece firmly. Use clamps

or a vice to firmly hold the work-piece. This

results in a safer grip than with your hand.

Under no circumstances should you

place your hands next to or in front of

the appliance or on the area to be

worked, you could be seriously injured if the

appliance slips.

Ensure that nobody is endangered by

flying sparks. Remove combustible materi-

als from the immediate vicinity. Flying sparks

are produced when metals are ground.

Introduce the appliance to the work-

piece when it is switched on. When the

task is complete, lift the appliance from the

work-piece and then switch it off.

Let the switched off appliance come

to a complete standstill before putting

it down.

After every use check the speed and

the noise level.

Check speed regularly.

ATTENTION! Clean the appliance before

89570_par_Druckluft_Exzenterschleifer_content_LB2.indd 43 29.05.13 17:33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89570 PDEXS 150 A1 in the language / languages: French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 89570 PDEXS 150 A1

Parkside IAN 89570 PDEXS 150 A1 User Manual - English, German, Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 89570 PDEXS 150 A1 Manual

Product: