Manual Parkside IAN 89570 PDEXS 150 A1 (page 46 of 51) (French)

745094

Zoom out

Zoom in

1/51

46 GB

Safety instructions / Before Initial Use

Safety instructions

The machine for sanding or the polisher must

be operated and maintained as recommended

in these instructions to minimise the creation of

dust and vapour.

Exhaust air must be discharged in such a way

that the amount of dust being blown about in

a dusty environment is minimised.

If dust or vapours are generated, the principal

task must be to control them in the area where

they are released.

All machine mounting parts or accessories in-

tended to collect, extract or eliminate airborne

dust or vapours should be used and maintained

according to manufacturer instructions.

Select, maintain and replace consumables /

machine tools as recommended in these in-

structions to prevent an unnecessary increase

in the production of dust or vapours.

Use respiratory protection equipment accord-

ing to employer instructions or as required by

environmental health regulations.

Noise hazards

With inadequate ear protection the

impact of high noise levels may result

in permanent hearing damage, hear-

ing loss and other problems, e.g. tin-

nitus (ringing, whistling or buzzing in

the ear).

It is imperative to perform a risk assessment

for these hazards and implement the suitable

regulatory mechanisms.

Suitable regulatory mechanisms to minimise

the risk include measures such as using insula-

tion to prevent pinging sounds on work-pieces.

Use ear protection according to your employ-

er‘s instructions or as required by labour- and

health regulations.

The sander or polishing machine must

be operated and maintained as rec-

ommended in these instructions to

prevent an unnecessary increase in

the noise level.

Select, maintain and replace consumables /

machine tools as recommended in these in-

structions to prevent an unnecessary increase

in the noise level.

Ensure that if the sander or the polish-

er is equipped with a silencer, this is

always in place and functional when

the machine is operated.

Hazard due to vibration

Exposure to vibration may cause

damage to the nerves and disturb

blood circulation in hands and arms.

When working in cold environments wear

warm clothes and keep hands warm and dry.

If you notice your hands or your fin-

gers become numb, tingle, or hurt or

your skin on fingers or hands becomes

white, stop working with the sander

or polisher, notify your employer and

consult a physician.

The sander or polishing machine must be

operated and maintained as recommended in

these instructions to prevent an unnecessary

increase in the vibration level.

Hold the machine firmly, but not too tightly,

maintaining the necessary hand reaction forces,

as the vibration hazard typically increases

when firming the grip.

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious

injuries.

Always close the air supply, release pressure

from the hose, and disconnect the machine from

the compressed air supply, when the machine

is not in use, before switching accessories or

when performing repairs.

Never aim the air flow at yourself or

others.

Hoses flapping about can result in

serious injuries. Therefore, always inspect

hoses and their fasteners for damage and a

secure fit.

89570_par_Druckluft_Exzenterschleifer_content_LB2.indd 46 29.05.13 17:33

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 89570 PDEXS 150 A1 in the language / languages: French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 89570 PDEXS 150 A1

Parkside IAN 89570 PDEXS 150 A1 User Manual - English, German, Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 89570 PDEXS 150 A1 Manual

Product: