745096
32
Zoom out
Zoom in
Previous page
1/41
Next page
32 GB
Safety Information
can vary from country to country. Nevertheless,
this information makes it possible for the user to
be able to make a better assessment of the
dangers and risks involved.
IMPORTANT: Use only normal, unleaded
petrol as fuel.
Read all the safety regulations and instruc-
tions. Any errors made in following the safety reg-
ulations and instructions may result in an electric
shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Layout (Fig. A - M)
1
Tank indicator
2
Tank cover
3
2 x 230 V
~
socket-outlets
4
Earth connection
5
Overload cut-out
6
Voltmeter
7
Oil filler screw
8
Oil drainage screw
9
Oil deficiency protection for low oil switch-off
10
On/Off switch
11
Choke lever
12
Reversing starter
13
Petrol cock
14
Wheels
15
Axle
16
Foot
17
Push bar holder
18
Push bar
19
Screws size M8 x 40
20
Screws size M8 x 16
21
Washers for wheels
22
Securing split pins for wheels
23
Nuts M8
24
Screwdriver
25
Spark plug wrench
Intended use
The device is designed for applications operated
with a 230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to provide
electric power tools and light sources with electricity.
When using the device with household appliances,
please check their suitability in accordance with
the relevant manufacturer’s instructions. In case of
doubt, ask an authorized dealer of the respective
equipment.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Generator: Synchronous
Protection type: IP23M
Continuous rated power
Prated (S1):
2600 W
Maximum power Pmax
(S2 2 min):
2800 W
Rated voltage Urated: 2 x 230 V
~
Rated current Irated: 11.3 A
Frequency Frated: 50 Hz
Drive engine design: 4-stroke, air-cooled
Displacement: 208 cm³
Fuel: Petrol
Tank capacity: 15 l
Engine oil: approx. 0.6 l
(15W40)
Safety Information / Before starting the equipment / Operation
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 85052 PSE 2800 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 85052 PSE 2800 B2 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 85052 PSE 2800 B2

Parkside IAN 85052 PSE 2800 B2 User Manual - French - 41 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info