Manual Parkside IAN 85052 PSE 2800 B2 (page 34 of 41) (English, German, Dutch)

745096

Zoom out

Zoom in

1/41

34 GB

Operation / Cleaning, maintenance, storage, transport and ordering of spare parts

Starting the engine

IMPORTANT!

When starting with the reserve starter

, the motor

may recoil suddenly as it starts up, resulting in hand

injuries.

Wear protective gloves when starting

the equipment.

Open the petrol cock

by turning it down.

Set the ON / OFF switch

to the “ON”

position.

Move the choke lever

to position I Ø I.

Start the engine with the reversing starter

by pulling forcefully on the handle. If the engine

does not start, pull the handle again.

Push the choke lever

back after the engine

has started.

Connecting consumers

to the generator

Connect the equipment you want to use to the

230 V

sockets

IMPORTANT! These sockets may be loaded

continuously (S1) with 2600 W and temporarily

(S2) for a maximum of 2 minutes with 2800 W.

J The generator is suitable for 230 V

AC appli-

ances only.

Do not connect the generator to the household

mains system as this may result in damage to

the generator itself or to other electrical appli-

ances in your home.

Note: Some electrical appliances (power jigsaws,

drills, etc.) may have a higher level of power con-

sumption when used in diﬃcult conditions

Switching oﬀ the engine

Before you switch oﬀ the generator, allow it to

run brieﬂy with no consumers so that it can

“cool down”.

Set the ON / OFF switch

to the “OFF”

position.

Close the petrol cock

Overload cut-out 2 x 230 V

socket-outlets

IMPORTANT! The generator is fitted

with an overload cut-out.

This shuts down the sockets

. You can restart the

sockets

by pressing the overload cut-out

IMPORTANT! If this happens, reduce

the electric power you are taking from

the generator or remove any defective

connected appliances.

IMPORTANT! Defective overload cut-

outs must be replaced only by overload

cut-outs of identical design and with the

same performance data. If repairs are

necessary, please contact your customer

service center.

Cleaning, maintenance,

storage, transport and

ordering of spare parts

Switch oﬀ the motor and pull the spark plug boot

from the spark plug before doing any cleaning and

maintenance work on the equipment.

ATTENTION! Stop the appliance in-

stantly and contact your point of service:

–

In the event of unusual vibrations or noise

–

If the engine appears to be overloaded or

misﬁres

Cleaning

Keep all safety devices, air vents (Fig. A/Item

A1) and the motor housing free of dirt and

dust as far as possible. Wipe the equipment

Cleaning, maintenance, storage, transport and ordering of spare parts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 85052 PSE 2800 B2 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 85052 PSE 2800 B2

Parkside IAN 85052 PSE 2800 B2 User Manual - French - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 85052 PSE 2800 B2 Manual

Product: