Manual Parkside IAN 73791 PDMT 6.2 A1 (page 39 of 44) (English, German, Dutch)

745111

Zoom out

Zoom in

1/44

39 GB

Safety information for air tools

Safety information for air tools / Before initial use / Commissioning

forces, as the vibration hazard typically incre-

ases when ﬁrming the grip.

Additional safety instructions

for pneumatic machinery

Compressed air can result in serious injuries.

- Always close the air supply, release pressure

from the hose, and disconnect the machine

from the compressed air supply, when the ma-

chine is not in use, before switching accessories

or when performing repairs.

- Never aim the air ﬂow at yourself or others.

Hoses ﬂapping about can result in serious inju-

ries. Therefore always inspect hoses and their

fasteners for damage and a secure ﬁt.

If using universal swivel couplings (coupling discs)

always use locking pins and use whip-check

hose safety cables for protection in the event

the connection between the hose and the ma-

chine or in between hoses fails.

Ensure not to exceed the maximum pressure

speciﬁed on the machine.

Never carry pneumatic tools by the hose.

Before initial use

Quick-release socket

Pressurised air hose

Quick-release socket

Quick-opening sleeve

Compressor

Filter

Pressure regulator

Oils

Connecting the equipment

Connect your equipment to the compressor us-

ing an air hose with an inner diameter of at

least 9 mm.

Ensure the hose is long enough to allow you to

work freely in your workplace.

Connect coupling

(see Fig. A)

Wrap coupling with teﬂon tape (not included).

Wrap the tape as tightly as possible around

the thread. This will minimise the likelihood of

air leaking and optimise the work process.

Now screw the coupling into the compressed

air equipment.

Using maintenance accessories

If available, you may use an in-line a line oiler,

-trap or an entire maintenance unit as shown

above. We highly recommend using such main-

tenance accessories.

Ensure pressure from the compressor does not

exceed 6.2 bar. The equipment is most eﬀec-

tive with pressures between 5.5 and 6.2 bar.

Commissioning

Installing accessories

(see Fig. B-H)

ATTENTION! Always remove the hose leading

to the compressor ﬁrst before changing acces-

sories.

Be sure the equipment is no longer functional!

Select the accessory suitable for the job. Instal-

lation is explained below using as an example

the straight scraper attachment

Only use suitable accessories. These may be

purchased from the manufacturer. Using non-

OEM accessories may result in hazards.

73791_Druckluft-Multitool_content_LB1 (nur NL).indd 39 11.05.12 17:56

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73791 PDMT 6.2 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 3,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73791 PDMT 6.2 A1 Manual

Product: