Manual Parkside IAN 73782 PDT 40 B2 (page 32 of 37) (English, German, Dutch, French)

745069

Zoom out

Zoom in

1/37

32 GB

Safety of the fastener driving tool / Preparing the product for use / OperationSafety of the fastener driving tool

– alterations not permitted by the

manufacturer,

– guiding on templates made of hard

material, e.g. steel,

– permitting to fall onto or slide across

the floor,

– using as a hammer,

– every type of external force.

Work safety

Never point a fastener driving tool that

is ready to use directly at yourself,

other persons or animals.

During work, hold the fastener driving

tool so that head and body can not be

injured by possible kickback due to a

fault in the power supply or from hard

places in the workpiece.

Never trigger the fastener driving tool

into empty space. Following this instruction

will prevent danger due to uncontrolled ﬂying

fasteners and overloading the device.

Before transporting, disconnect the

fastener driving tool from the com-

pressed air network, particularly when

using ladders or are moving with an

unaccustomed body posture.

At the workplace, only carry the fas-

tener driving tool by its grip and never

with the trigger actuated.

Pay attention to workplace conditions.

Fasteners may strike completely through thin

workpieces or slide oﬀ corners or edges to

cause a danger to persons.

Use suitable personal protec-

tion equipment, e.g. hearing

and eye protection. Wearing personal

protective devices such as dust mask, non-slip

safety shoes, safety helmet or hearing protectors,

depending on the type of fastener driving tool

and its application, reduces the risk of injuries.

Additional safety

information for

compressed air tackers

RISK OF INJURY! Never

exceed the maximum permissible operating

pressure of 8 bar. Use a pressure reducer to

adjust the operating pressure.

RISK OF INJURY! Never

use oxygen or other ﬂammable gases as en-

ergy source.

Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

Keep children and other indi-

viduals away from the fas-

tener driving tool during use.

Distractions can cause you to lose control of

the device.

Remain alert at all times, watch what

you are doing and always proceed

with caution when working with a

fastener driving tool. Do not use any

fastener driving tool if you are tired

or under the influence of drugs, alcohol

or medication. One moment of carelessness

when using the fastener driving tool may result

in serious injuries.

Avoid placing your body in an unnat-

ural position. Keep proper footing

and balance at all times. By doing this you

will be in a better position to control the fas-

tener driving tool in unforeseen circumstances.

Before any repair and maintenance work or

transport, remove the device from the com-

pressed air source.

RISK OF INJURY! Do not use the

device on scaﬀolds or ladders.

Never use hydrogen, oxygen, car-

bon dioxide or other bottled gasses

to power this tool as doing so may

result in an explosion and thus may cause se-

vere injuries.

RISK OF INJURY! Do not use the device if

the trigger lock

is damaged or has been

removed. Otherwise injuries may result.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 73782 PDT 40 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 73782 PDT 40 B2 Manual

Product: