Manual Parkside IAN 42999 PFMR 1400 B1 (page 8 of 36) (English, German, Dutch, French)

745205

Zoom out

Zoom in

1/36

8 GB/IE

Safety notes for paint and mortar mixer / Before use / OperationGeneral safety advice for electrical … / Safety notes for paint and mortar mixer

c) Avoid unintentional operation of the

device. Check that the electrical power

tool is switched oﬀ before you connect

it to the mains, pick it up or carry it.

Accidents can happen if you carry the device

with your ﬁnger on the ON / OFF switch or with

the device switched on.

d) Remove any setting tools or spanners

before you switch on the device. A tool

or spanner left attached to a rotating part of a

device can lead to injury.

e) Avoid placing your body in an unnat-

ural position. Keep proper footing and

balance at all times. By doing this, you will

be in a better position to control the electrical

power tool in unforeseen circumstances.

f) Wear suitable clothing. Do not wear

loose clothing or jewellery. Keep your

hair, clothing and gloves clear of mov-

ing parts. Loose clothing, jewellery or long

hair can become trapped in moving parts.

g) If vacuum dust extraction and collection

devices are ﬁtted, do not forget to

check

that they are properly connected and

used correctly. The use of these devices re-

duces the hazard presented by dust.

4. Careful handling and use of

electrical power tools

a) Do not overload the device. Always use

an electrical power tool that is intended

for the task you are undertaking. By

using the right electrical power tool for the job,

you will work more safely and achieve a better

result.

b) Do not use an electrical power tool if

its switch is defective. An electrical power

tool that can no longer be switched on and oﬀ

is dangerous and must be repaired.

c) Pull the mains plug from the socket

before you make any adjustments to

the device, change accessories or when

the device is laid aside. This precaution is

intended to prevent you from unintentionally

starting the device.

d) Always ensure that electrical power

tools are kept out of reach of children

when not in use. Do not let anyone

use the device if he or she is not famil

iar

with it or has not read the instructions

and advice. Electrical power tools are dan-

gerous when they are used by inexperienced

people.

e) Maintain the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally aﬀect the

functioning of the device. Have dam-

aged parts repaired before you use the

device. Many accidents have their origins in

poorly maintained electrical power tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations for this particular type

of device. When doing this, take the

working conditions into consideration,

as well as the task at hand. The use of

electrical power tools for purposes other than

those intended can lead to dangerous situations.

5. Service

a) Have your device repaired at the ser-

vice centre or by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

Safety notes for paint and

mortar mixer

Hold the device by the insulated han-

dle surfaces when performing work

where there is danger of the applied

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 42999 PFMR 1400 B1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 42999 PFMR 1400 B1 Manual

Product: