745205
6
Zoom out
Zoom in
Previous page
1/36
Next page
6 GB/IE
Introduction / General safety advice for electrical power toolsIntroduction
Paint & mortar mixer
PFMR 1400 B1
Introduction
Congratulations on your purchase. You have selec-
ted a high quality product. The instructions for use
are a part of this product. They contain important
information about safety, use and disposal. Before
using the product, please familiarise yourself with all
the operating and safety instructions. When passing
this product on to others please be sure to also in-
clude all of its documentation.
Intended use
The machine is intended for mixing building materi-
als that are in a fluid or powder form, e.g. paint,
mortar, adhesives, plaster and similar substances.
Depending on the consistency of the material and
the amount to be mixed, the appropriate agitator
with the suitable mixing effect should be used. The
machine may only be utilised for its intended use.
Any other use is not intended. The user / operator,
not the manufacturer, is liable for resulting damages
or any type of injury resulting from any other use that
is not intended. Please note that our devices were
not constructed for commercial, manual, or industrial
use. We do not accept any warranty liability if the
device is used for commercial, manual, or industrial
operations, or activities similiar to these.
Features
1
Handle
2
Open-end spanner for changing agitator
3
Support bracket
4
Agitator shaft with M-14 inner threading
5
ON / OFF switch
6
Hold-to-run button
7
Mixing paddle
7 a
Mixing spiral
7 b
Shaft
Scope of delivery
1 Paint & mortar mixer PFMR 1400 B1
1 Mixing paddle
2 Open-end spanners for changing agitator
1 Support bracket
4 Crosshead screws
1 Instructions for use
Technical Data
Mains voltage: 230 V∼ 50 Hz
Power input: 1400 W
Idle speed: 0–700 min
-1
Mixer holder: M14
Protection class: II /
Weight without
mixing paddle: 3590 kg
Noise and vibration data:
Values for noise determined in accordance with
EN 60745. The A-weighted noise levels of the
electrical power tool are typically:
Sound pressure level: 90.3 dB(A)
Sound power level: 101.3 dB(A)
Instability K: 3 dB
Wear hearing protection!
The total vibration (vector sum of three directions) is
calculated in accordance with EN 60745:
Vibration emission value a
h
= 1.570 m / s
2
,
Uncertainty K = 1.5 m / s
2
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool and in some cases,
may exceed the value specified in these instructions.
Regularly using the electric tool in such a way may
make it easy to underestimate the vibration.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 42999 PFMR 1400 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 42999 PFMR 1400 B1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info