Manual Parkside IAN 42999 PFMR 1400 B1 (page 7 of 36) (English, German, Dutch, French)

745205

Zoom out

Zoom in

1/36

7 GB/IE

Introduction / General safety advice for electrical power toolsIntroduction

Note: If you wish to make an accurate assessment

of the vibration loads experienced during a particu

lar

period of work, you should also take into account

the intervening periods of time when the device is

switched oﬀ or is running but is not actually in use.

This can result in a much lower vibration load over

the whole of the work period.

General safety advice for

electrical power tools

Please read all safety

information and instructions. Failure to ob-

serve the safety information and instructions can

result in electric shock, ﬁre and / or serious injury.

For future reference keep all the safety

advice and instructions in a safe place.

The term “electrical tool” used in the safety advice

refers to electrical tools powered by mains electric-

ity (by means of a mains lead) and electrical tools

mains

lead).

1. Workplace safety

a) Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

b) Do not work with the device in poten-

tially explosive environments, which

contain inﬂammable liquids, gases or

dusts. Electrical power tools create sparks,

which can ignite dusts or fumes.

c) Keep children and other people away

while you are operating the electrical

tool. Distractions can cause you to lose control

of the device.

2. Electrical safety

a) T

he mains plug on the device must matc

the mains socket. The plug must not be

modiﬁed in any way. Do not use an

adapter plug with devices ﬁtted with

a protective earth. Unmodiﬁed plugs and

matching sockets reduce the risk of electric

shock.

b) Avoid touching grounded surfaces

such as pipes, radiators, ovens, and

refrigerators. There is an increased risk of

electric shock if your body is earthed.

c) Keep the device away from rain or

moisture. The penetration of water into the elec-

trical device increases the risk of an electric shock.

d) Do not use the mains lead for any pur-

pose for which it was not intended, e.g.

to carry the device, to hang up the de-

vice or to pull the mains plug out of the

mains socket. Keep the mains lead

away

from heat, oil, sharp edges or moving

parts of the device. Damaged or tangled

cables increase the risk of an electric shock.

e) If you are working outdoors with an

electrical power tool, always use ex-

tension cords that are approved for

outdoor use. The use of an extension cable

suitable for outdoor use reduces the risk of

electric shock.

f) Use a residual current device (RCD) for

protection if the operation of the elec-

trical power tool in a moist environ

ment

cannot be avoided. The use of an RCD re-

duces the risk of electric shock.

3. Personal safety

a) Remain alert at all times, watch what

you are doing and always proceed

with caution. Do not use the device if

you are tired or under the inﬂuence of

drugs, alcohol or medication. One mo

ment

of carelessness when using the device can lead

to serious injury.

b) Wear personal protective equipment

and always wear safety glasses. The

wearing of personal protective equipment such

as dust masks, non-slip safety shoes, safety hel-

mets or ear protectors, appropriate to the type

of electrical power tool used and work under-

taken, reduces the risk of injury.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 42999 PFMR 1400 B1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 42999 PFMR 1400 B1 Manual

Product: