Manual Parkside IAN 311903 PWS 230 C3 (page 29 of 109) (English, German, Dutch, French, Polish)

749297

Zoom out

Zoom in

1/109

PWS 230 C3 GB│IE │ 25 ■

Working procedures

NOTE

► Grinding tools should only be used for the

recommended applications. Otherwise, they

can break, be damaged or cause injuries.

Rough grinding:

Never use cutting discs for rough

grinding!

■Move the angle grinder with moderate pres-

sure back and forth over the workpiece.

■For soft material, move the rough grinding

disc at a shallow angle over the workpiece;

for hard material at a slightly steeper angle.

Abrasive cutting:

Never use rough grinding discs for

cutting!

■Use only tested ﬁbre-reinforced cutting or

grinding discs that are approved for a circum-

ferential speed of not less than 80 m/s.

CAUTION!

The grinder continues running after being turned

oﬀ. Do not try to brake it by applying lateral

counterpressure.

■Secure the workpiece! Use clamps/a vice to

hold the workpiece ﬁrmly in place. This is much

safer than simply holding it in your hand.

■Always switch oﬀ the appliance before put-

ting it away and wait for the appliance to

come to a complete standstill.

■Release the ON/OFF switch immediately in

the event of a power failure or when the plug

is pulled out. Move it into the OFF position. This

prevents an uncontrolled restart.

■Use the appliance only for dry cutting or

sanding.

■The additional handle must be mounted on

the appliance for all work.

■Materials containing asbestos may not be

processed. Asbestos is a known carcinogen.

Tip! This symbol indicates proper

behaviour.

HAZARD! ALWAYS GUIDE THE

APPLIANCE THROUGH THE WORK-

PIECE IN REVERSE ROTATION.

► In the opposite direction there is a risk of

kickback. The appliance can be pushed out

of the cut.

■Always switch the appliance on before apply-

ing it to the workpiece. After completing the

task, lift the appliance from the workpiece and

then switch it oﬀ.

■Always hold the appliance ﬁrmly with two

hands while working. Ensure that your stance

is secure and stable.

■ For an optimum grinding eﬀect, move the ap-

pliance evenly at an angle of 15° to 30° (be-

tween grinding disc and workpiece) backwards

and forwards.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311903 PWS 230 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 311903 PWS 230 C3 Manual

Product: