Manual Parkside IAN 311903 PWS 230 C3 (page 31 of 109) (English, German, Dutch, French, Polish)

749297

Zoom out

Zoom in

1/109

PWS 230 C3 GB│IE │ 27 ■

Fitting the additional handle

CAUTION!

► For safety reasons, this appliance may only

be used with the additional handle .

Failure to do this can lead to serious injury.

The additional handle can be screwed

onto the left or the right depending on the job

at hand.

Fitting/changing the roughing/

cutting disc

Always wear protective gloves when chang-

ing cutting/rough grinding discs. Roughing and

cutting discs become very hot. Allow them to cool

down completely before touching them.

Pay attention to the dimensions of the roughing/

cutting disc. The diameter of the hole must ﬁt the

mounting ﬂange without any play. Do not use a

reducer or adapter.

■Check the roughing/cutting disc. It should not

be damaged or damp, and it should have no

cracks. Otherwise, it could break during use

and cause injuries.

NOTE

► Use only discs which are free of dirt.

■ Use only grinding discs whose permissible

speed rating is at least as high as that on the

type plate on the power tool.

■RISK OF INJURY! Press the spindle locking

button only when the mounting spindle is

at a complete standstill.

♦ Press the spindle locking button to lock the

spindle.

♦ Undo the clamping nut using the two-hole

mounting spanner (see ﬁg D).

♦ Place the rough grinding or cutting disc with the

label side towards the appliance on the mount-

ing ﬂange .

♦ Then replace the clamping nut with the raised

side facing up on the mounting spindle .

With thin grinding discs (see ﬁg. 1):

♦ The collar of the clamping nut faces upwards

so that a thin grinding disc can be ﬁtted safely.

≤ 3,2 mm

Fig. 1

♦ Press the spindle locking button to lock the

spindle.

♦ Tighten the clamping nut using the two-hole

mounting spanner .

With thick grinding discs (see ﬁg. 2):

> 3,2 mm

Fig. 2

The collar of the clamping nut faces downwards

so that a thick grinding disk can be ﬁtted securely

onto the mounting spindle .

♦ Lock the mounting spindle .

♦ Tighten the clamping nut in a clockwise di-

rection using the two-hole mounting spanner .

NOTE

► If the disc does not turn smoothly or vibrates

after the change, the disc must be replaced

immediately.

♦ For safety’s sake run the appliance at maximum

speed for 60 seconds after every disc change.

Be aware of unusual noises and sparks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 311903 PWS 230 C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 311903 PWS 230 C3 Manual

Product: