749299
33
Zoom out
Zoom in
Previous page
1/76
Next page
33GB/IE
ATTENTION!
After welding, the welding clamp and
the welding rod must be set down on the
insulated holder. The fusion slag can only
be removed once the rod has cooled down.
To re-weld the interrupted weld, the fusion
lag must first be removed from the welding
position.
ATTENTION!
A voltage 10 % below the rated input volt-
age of the welding tool may result in:
A drop in the current of the tool.
The arc stopping or becoming unstable.
ATTENTION!
The arc radiation may cause inflamma-
tion of the eye and skin burns.
Spray and fusion slag may cause eye
injuries and burns.
Wear tinted eye goggles or a face
shield.
The face shield must comply with safety
standard EN175.
Only use welding cables included in
delivery (10 mm2).
Note: Determine which welding method is
more suitable for yourself after welding a test
piece.
Note: Once it has worn down completely,
the electrode must be replaced.
zMaintenance and Cleaning
Note: The welding tool requires regular
maintenance and reconditioning to work
properly and to comply with safety require-
ments. Improper and incorrect operation
may result in malfunctions and damage the
tool.
Start up / Welding / Maintenance and Cleaning
zWelding
Choose from welding with the tool directed towards the unwelded or the welded part.
The following illustrates how the direction of movement has on the quality of the weld:
Towards the unwelded
part: Towards the welded
part:
Weld penetration less greater
Weld width larger smaller
Welding bead flatter higher
Weld imperfections greater less
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310850 PISG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310850 PISG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info