749299

Parkside IAN 310850 PISG 120 A1 Manual

32
Zoom out
Zoom in
Previous page
1/76
Next page
32 GB/IE
zStart up
Note: The welding tool is suitable for weld-
ing with electrodes.
Use electrode retaining clips without pro-
truding retaining screws meeting today‘s
safety standards.
Be sure the ON / OFF switch
9
is set to
position “O“ (“OFF“) or the main supply
cable
10
is not plugged into the mains
socket.
Connect the welding cables according
to polarity and electrode manufacturer
instructions.
To do so, connect the port of the earth
terminal
4
(black) with the appropriate
outlet on the inverter welding machine
(black, marked with “-”).
Connect the port of the electrode holder
5
(red) with the appropriate outlet on
the inverter welding device (red, marked
with “+”),
Put on suitable protective clothing
according to provisions and prepare the
work area.
Connect the earth terminal
4
to the
workpiece.
Secure the electrode in the electrode
holder
5
.
Switch on the device by setting the ON /
OFF switch
9
to the “I“ (“ON“) position.
Set the welding current with the control
knob
3
according to the electrode used.
Note: Please see the table below for the
welding current according to electrode
diameter.
Ø Electrode welding current
1.6 40 – 55 A
2.0 55 – 65 A
2.5 65 – 80 A
3.2 80 – 120 A
Note: For the welding currents of 80 A to
120 A, please use welding electrodes with
a diameter of 3.2 mm (not included in the
scope of delivery).
Attention: Do not bring the earth
terminal
4
and the electrode holder
5
/
electrodes into direct contact with one
another.
Attention: When welding with elec-
trodes (MMA - manual metal arc
welding) the electrode holder
5
and the
earth terminal
4
lug must be connected
to positive (+) or negative (-) according
to the welding rod specifications.
Hold the welding shield
7
in front of
your face and begin welding.
To stop working, set the ON / OFF
switch
9
to the “O“ (“OFF“) position.
ATTENTION!
When the thermal overload protection is
triggered, the yellow control lamp
2
lights
up. In this case, no further welding is
possible. The device is still in operation for
the fan to cool the device. As soon as the
device is ready for use again, the yellow
control lamp
2
switches off automatically.
The welding function is now given again.
ATTENTION!
Be careful not to rub the welding rod against
the workpiece. This could damage the
workpiece and make it difficult to strike an
arc. Maintain the proper distance to the
workpiece after striking the arc. The distance
should correlate to the diameter of the
welding rod used. Maintain this distance as
accurately and consistently as possible whilst
welding. The angle between the welding
rod and the working direction should be
between 20 and 30 °.
Start up
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310850 PISG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310850 PISG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info