749299

Parkside IAN 310850 PISG 120 A1 Manual

31
Zoom out
Zoom in
Previous page
1/76
Next page
31GB/IE
open loop. Based on the out-
put voltage this welding equip-
ment may be used in these
conditions.
zProtective clothing
Whilst working the welder
must be protected against rays
and burns all over the body
with the appropriate clothing
and face protection. Remem-
ber the following steps:
Put on protective clothing
before welding.
Put on gloves.
Open windows or vent to
ensure air supply.
Wear safety goggles and a
mask.
Wear gauntlet gloves made
from suitable material (leather)
on both hands. These must be
in good condition.
Wear suitable aprons to pro-
tect the clothing from sparks
and burns. When required
based on the working method,
e.g. welding overhead, wear
a protective suit and, if neces-
sary, a head guard.
zProtecting against
rays and burns
Mark the work area with a
sign „Danger! Do not look into
flames!“ to indicate the risk to
the eyes. If possible, shield the
work areas to protect persons
nearby. Keep unauthorised
persons away from the weld-
ing area.
Walls in the direct vicinity
of fixed work areas should
be neither light coloured
nor glossy. Protect windows
against rays passing through
or reflecting at a minimum to
head height, e.g. with suitable
paint.
zPrior to commissioning
Take the device and accessories out of
the packaging and check
for damages (e.g. transport damages).
Fasten the carrying strap to the device
(see Fig. C1 – C4).
Connect the electrode holder
5
and the
earth terminal
4
to the welding ma-
chine.
Insert an electrode into the electrode
clamp device (see Fig. D).
zInstalling the welding
shield
Install the handle
8
on the welding
shield
7
as shown in Fig. A.
Install the protective glass
11
on the
welding shield
7
as shown in Fig. B.
Safety instructions / Prior to commissioning / Installing the welding shield
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310850 PISG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310850 PISG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info