749299

Parkside IAN 310850 PISG 120 A1 Manual

27
Zoom out
Zoom in
Previous page
1/76
Next page
27GB/IE
Do not weld atop containers,
receptacles or pipes, which
do or did contain flammable
liquids or gasses.
WARNING Avoid any direct
contact with the welding
circuit. The no-load voltage
between the electrode holder
and earth terminal can be dan-
gerous, there is a risk of elec-
tric shock.
Do not store or use the equip-
ment in a moist or wet environ-
ment or in the rain. The Protec-
tion Provision IP21S applies in
this respect.
Protect the eyes with the ap-
propriate safety glass (DIN
Grad 9-10) to be installed in
the included welding shield.
Use gloves and dry protec-
tive clothing free from oil and
grease to protect the skin from
ultraviolet rays and the arc.
WARNING Do not use the
welding power source to thaw
pipes.
Remember:
The arc ray can damage the
eyes and cause burns to the
skin.
Arc welding produces sparks
and drops of molten metal, the
welded work piece begins to
glow and remains very hot for
a relatively long time. There-
fore do not touch the work
piece with bare hands.
Arc welding releases noxious
fumes. Be careful not to inhale
these as best possible.
Protect yourself from the danger-
ous effects of the arc and keep
persons not involved in the work
at least 2 m away from the arc.
ATTENTION!
Depending on mains condi-
tions at the connection point,
operating the welding equip-
ment may interfere with the
voltage supply for other loads.
When in doubt, please contact
your power supply company.
Operating the welding equip-
ment may interfere with the
functionality of other devices,
e.g. hearing aids, pacemak-
ers, etc.
zSafety hazards
during arc welding
Arc welding produces a variety
of safety hazards. It is therefore
particularly important for the
welder to observe the following
rules to avoid putting himself and
others in danger and to prevent
damage to persons and the
equipment.
Safety instructions
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310850 PISG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310850 PISG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info