749299
26
Zoom out
Zoom in
Previous page
1/76
Next page
26 GB/IE
zSafety instructions
Please carefully read the instruc-
tions for use and follow the spec-
ified notices. Familiarise yourself
with the tool, its proper use and
the safety notices using these in-
structions for use. The nameplate
contains all the technical data for
this welding tool, please learn
about the technical facts of this
tool.
This device may be used by
children aged 16 years and
up, as well as by persons with
reduced physical, sensory or
mental capacities, or lacking
experience and / or knowl-
edge, so long as they are
supervised or instructed in the
safe use of the device and un-
derstand the associated risks.
Do not allow children to play
with the appliance. Cleaning
and user maintenance should
not be performed by children
without supervision.
Only have repairs and / or
maintenance performed by
electrically skilled persons.
Only use the welding cables
included (PISG 120 A1,
H01N2-D1x10 mm2).
During use the equipment
should not be located directly
against a wall, be covered,
or be jammed between other
equipment to ensure ample air
can be taken in through the
ventilation louvres. Verify the
equipment is correctly connect-
ed to the mains voltage. Avoid
any tensile load on the mains.
Unplug the mains plug from
the socket before transferring
the equipment to a different
location.
Always switch the equip-
ment off with the ON / OFF
switch when not in use. Set
the electrode holder down on
an insulated pad and allow
to cool for 15 minutes before
removing the electrodes from
the holder.
Pay attention to the condition
of the welding cables, the elec-
trode holders and the earth
terminals. Worn insulation and
conducting parts can produce
hazards and reduce the weld-
ing quality.
Arc welding produces sparks,
melted metal parts and smoke.
Therefore note: Remove any
flammable substances and
/ or materials from the work
area and its immediate sur-
roundings.
Ensure the work area is venti-
lated.
Safety instructions
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 310850 PISG 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 310850 PISG 120 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info