748958
29
Zoom out
Zoom in
Previous page
1/144
Next page
29
GB IE
tation of the rotary wheel. Long
drilling chips may cause injury.
Keep handles dry, clean and
free from oil and grease. Greasy,
oily handles are slippery and lead to
loss of control.
Use clamps to hold the workpie-
ce in place. Do not work on any
workpieces that are too small for
clamping. If you hold the workpiece by
-
ly against rotation and may hurt yourself.
Switch the power tool off imme-
diately if the bit jams. The bit jams
when:
- the power tool is overloaded or
- the workpiece to be machined is
jammed.
Do not touch the bit after wor-
king before it has cooled down.
The bit is very hot during use.
Inspect the cable regularly and
have a damaged cable repaired
only by an authorised customer
service centre. Replace damaged
extension cables. This will ensure
that the power tool remains safe.
Store unused power tools in a
safe place. The storage place
should be dry and lockable. This
prevents the power tool from being
damaged as a result of being stored or
operated by inexperienced people.
Never leave the tool before it has
come to a complete standstill.
After-running bits can cause injury.
Do not use the power tool with
a damaged cable. Do not touch
the damaged cable and pull the
mains plug if the cable is da-
maged while working. Damaged
cables increase the risk of electric shock.
The device is unsuitable for processing
of foods.
Edit not work pieces that you can not
sure retain. Especially round or uneven
workpieces.
Avoid abnormal body postures.
Ensure secure footing and keep your
balance at all times.
Safety Instructions for
Handling the Laser
Caution: Laser radiation - Do not look into
the beam - Laser class 2
 
Markings and warnings are located next
to the hand spindle guide (9).
Safety Instructions for
Handling Batteries
Ensure at all times that the batteries are
inserted with the correct polarity (+ and
–), as shown on the battery itself.
Do not short-circuit the batteries.
Do not charge non-rechargeable batteries.
Do not overcharge batteries!
Do not mix old and new batteries or
batteries of a different type or from
different manufacturers! Replace all bat-
teries of a set at the same time.
Remove used batteries immediately
from the device and dispose of them
correctly!
Do not heat the batteries!
Do not carry out any welding or solde-
ring work directly on the batteries!
Do not take the batteries apart!
Do not deform the batteries!
 
Store the batteries out of the reach of
children.
Do not allow children to replace the
batteries without supervision!
 
cookers or other sources of heat. Do not
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 304520 PTBM 500 E5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304520 PTBM 500 E5 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info