Manual Parkside IAN 304520 PTBM 500 E5 (page 28 of 144) (English, German, Dutch, Danish, French, Polish)

748958

Zoom out

Zoom in

1/144

GB IE

- Before further use of the power tool,

safety devices or slightly damaged

parts must be carefully examined in

respect of their proper and intended

function.

- Check that the moving parts are wor-

king properly and are not jammed

or whether parts are damaged. All



satisfy all conditions to ensure the

proper operation of the power tool.

- Damaged safety equipment and

parts must be repaired properly or

replaced by an authorised specialist

workshop unless otherwise indicated

in the instructions.

- Damaged switches must be replaced

at a customer service workshop.

- Do not use power tools if the switch

cannot be turned on and off.

• CAUTION! The use of other bits and

other accessories can result in a risk of

personal injury.

• Have your power tool be re-



- This power tool complies with the

relevant safety regulations. Repairs



electrician, using original spare parts;

otherwise accidents involving the user

may result.

Service:

• Have your power tool repaired



only with original spare parts.

This will ensure that the power tool re-

mains safe.

Safety Instructions for Box

Column Drills

• Never make the warning labels

on the power tool illegible.

• Attach the power tool to a solid,

 If the

power tool can slip or wobble, the bit

may not be guided smoothly and safely.

• Keep the work area clean ex-

cept for the workpiece to be

machined. Sharp-edged drilling chips

and objects can cause injury. Material

mixtures are particularly dangerous.

Light metal dust can burn or explode.

• Set the correct speed before

starting work. The speed must

be appropriate for the drill dia-

meter and the material to be

drilled. At an incorrectly set speed the

bit may get jammed in the workpiece.

• Only when the device is turned on

should the bit be moved against

the work piece. Otherwise there is a

danger that the bit will get jammed in the

workpiece and the workpiece will rota-

te with the bit. This can lead to injuries.

• Do not put your hands in the

area of the drill while the power

tool is running. Upon contact with

the bit is a risk of injury.

• Never remove drilling chips from

the drilling area while the pow-

er tool is running. Always put the

drive mechanism in the standby positi-



• Do not remove accumulated drill

chips with your bare hands.

There is a risk of injury due to hot and

sharp metal shavings in particular.

• Break up long drilling chips by

interrupting the drilling opera-

tion with a short backward ro-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 304520 PTBM 500 E5 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 304520 PTBM 500 E5 Manual

Product: