Manual Parkside IAN 303408 PBS 350 A1 (page 22 of 72) (English, German, Dutch, French)

748151

Zoom out

Zoom in

1/72

15GB/IE

• If possible, store the packaging until the warranty period

has expired.

ATTENTION

The device and packaging materials are not toys! Children

must not be allowed to play with plastic bags, ﬁlm and small

parts! There is a risk of swallowing and suffocation!

• Bandsaw / Bandsaw blade (pre-assembled)

• Saw table

• Push stick

• Parallel stop

• Open-ended spanner, size 10/13

• Allen key, size 3/4/5

• Screwdriver

• Original operating instructions

4. Intended use

The band saw is designed to perform longitudinal and cross

cuts on timber or wood-type materials. To cut round materi-

als you must use suitable holding devices.

The equipment is to be used only for its prescribed pur-

pose. Any other use is deemed to be a case of misuse.

The user / operator and not the manufacturer will be liable

for any damage or injuries of any kind caused as a result of

this.

The machine is to be operated only with suitable saw blades.

To use the machine properly you must also o serve the safety

regulations, the assembly instructions and the operating in-

structions to be found in this manual.

All persons who use and service the machine have to be ac-

quainted with this manual and must be informed about the

machine’s potential hazards. It is also imperative to observe

the accident prevention regulations in force in your area. The

same applies for the general rules of occupational health

and safety.

The manufacturer shall not be liable for any changes made to

the machine nor for any damage resulting from such changes.

Even when the machine is used as prescribed it is still impos-

sible to eliminate certain residual risk factors. The following

hazards may arise in connection with the machine’s con-

struction and design:

• Damage to hearing if ear-muffs are not used as necessary.

• Harmful emissions of wood dust when used in closed

rooms.

• Contact with the blade in the uncovered cutting zone.

• Injuries (cuts) when changing the blade.

• Injury from catapulted workpieces or parts of workpieces.

• Crushed ﬁngers.

• Kickback

• Tilting of the workpiece due to inadequate support.

• Touching the blade.

• Catapulting of pieces of timber and workpieces.

Please note that our equipment has not been designed for

use in commercial, trade or industrial applications. Our war-

ranty will be voided if the equipment is used in commercial,

trade or industrial businesses or for equivalent purposes.

5. Safety information

Attention! The following basic safety measures must be

observed when using electric tools for protection against

electric shock, and the risk of injury and ﬁre. Read all these

notices before using the electric tool and keep the safety in-

structions for later reference.

Safe work

1. Keep the work area orderly

- Disorder in the work area can lead to accidents.

2. Take environmental inﬂuences into account

- Do not expose electric tools to rain.

- Do not use electric tools in a damp or wet environment.

- Make sure that the work area is well-illuminated.

- Do not use electric tools where there is a risk of ﬁre or

explosion.

3. Protect yourself from electric shock

- Avoid physical contact with earthed parts (e.g. pipes,

radiators, electric ranges, cooling units).

4. Keep other people away

- Do not let other people — especially children — touch

the electric tool or its cable. Keep them clear of the

work area.

5. Securely store unused electric tools

- Unused electric tools should be stored in a dry, elevat-

ed or closed location out of the reach of children.

6. Do not overload your electric tool

- They work better and more safely in the speciﬁed out-

put range.

7. Use the correct electric tool

- Do not use low-output electric tools for heavy work.

- Do not use the electric tool for purposes for which it is

not intended. For example, do not use handheld circu-

lar saws for the cutting of branches or logs.

- Do not use the electric tool to cut ﬁrewood.

8. Wear suitable clothing

- Do not wear wide clothing or jewellery, which can be-

come entangled in moving parts.

- When working outdoors, anti-slip footwear is recom-

mended.

- Tie long hair back in a hair net.

9. Use protective equipment

- Wear protective goggles.

- Wear a mask when carrying out dust-creating work.

10. Connect the dust extraction device if you will be pro-

cessing wood, materials similar to wood, or plastics.

- If connections for dust extraction and a collecting de-

vice are present, make sure that they are connected

and used properly.

- When processing wood, materials similar to wood,

and plastics. Operation in enclosed spaces is only per-

mitted with the use of a suitable extraction system.

11. Do not use the cable for purposes for which it is not intended

- Do not use the cable to pull the plug out of the outlet.

Protect the cable from heat, oil and sharp edges.

12. Secure the workpiece

- Use the clamping devices or a vice to hold the work-

piece in place. In this manner, it is held more securely

than with your hand.

Hallo sehr geehrte Damen und Herren, ich suche einen Ersatz für die Bandsäge.
Einmal das Sägeblatt und zum anderen Die Bandauflage für die zwei Rollen.
Vielen Dank im Voraus. Submitted on 19-7-2022 at 10:02
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 303408 PBS 350 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 303408 PBS 350 A1 Manual

Product: