Manual Parkside IAN 303408 PBS 350 A1 (page 21 of 72) (English, German, Dutch, French)

748151

Zoom out

Zoom in

1/72

14 GB/IE

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

we hope your new tool brings you much enjoyment and suc-

cess.

NOTE:

According to the applicable product liability laws, the manu-

facturer of the device does not assume liability for damages

to the product or damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service techni-

cians,

• Installation and replacement of non-original spare parts,

• Application other than speciﬁed,

• A breakdown of the electrical system that occurs due to

the non-compliance of the electric regulations and VDE

regulations 0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the operating instructions

before installing and commissioning the device.

The operating instructions are intended to help the user to

become familiar with the machine and take advantage of its

application possibilities in accordance with the recommen-

dations.

The operating instructions contain important information

on how to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, reduce

downtimes and how to increase reliability and service life

of the machine.

In addition to the safety regulations in the operating instruc-

tions, you have to meet the applicable regulations that apply

for the operation of the machine in your country.

Keep the operating instructions package with the machine at

all times and store it in a plastic cover to protect it from dirt

and moisture. Read the instruction manual each time before

operating the machine and carefully follow its information.

The machine can only be operated by persons who were

instructed concerning the operation of the machine and who

are informed about the associated dangers. The minimum

age requirement must be complied with.

In addition to the safety requirements in these operating

instructions and your country’s applicable regulations, you

should observe the generally recognized technical rules

concerning the operation of woodworking machines.

We accept no liability for damage or accidents which arise

due to non-observance of these instructions and the safety

information.

2. Device description (Fig. 1-16)

1. Clamping screw

2. Top saw band roller

3. Rubber surface

4. Saw band guard

5. Top saw band guide

6. Table insert

7. Saw table

8. Bottom saw band roller

9. Foot

10. Cover locking mechanism

11. Side cover

12. On/off switch

13. Locking screw for top saw band roller

14. Set screw for top saw band roller

15. Machine frame

16. Mains cable

17. Degree scale for swivel range

18. Motor

19. Extraction nozzle

20. Locking handle for saw table

21. Bandsaw blade

22. Adjustment handle for saw band guide

23. Locking handle for saw band guide

24. Parallel stop

25. Clamping bar for parallel stop

26. Push stick

27. 3 mm Allen key

28. 4 mm Allen key

29. Screwdriver

30. Open-ended spanner

31. Wing nut

32. Clamping plate

33. Knurled nut

34. U-reinforcement

35. Allen screw for top support bearing

36. Top support bearing

37. Top guide pin

38. Allen screw for top guide pins

39. Retainer (top)

40. Allen screw top retainer (2x)

41. Allen screw bottom support bearing

42. Bottom support bearing

43. Screw bottom retainer

44. Saw band protection

45. Allen screw for bottom guide pins

46. Bottom guide pin

47. Retainer (bottom)

48. Push Stick retainer

49. Screw (saw table adjustment)

50. Nut (saw table adjustment)

51. 5 mm Allen key

3. Scope of delivery

• Open the packaging and remove the device carefully.

• Remove the packaging material as well as the packaging

and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport damage.

Hallo sehr geehrte Damen und Herren, ich suche einen Ersatz für die Bandsäge.
Einmal das Sägeblatt und zum anderen Die Bandauflage für die zwei Rollen.
Vielen Dank im Voraus. Submitted on 19-7-2022 at 10:02
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 303408 PBS 350 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 303408 PBS 350 A1 Manual

Product: