748020
19
Zoom out
Zoom in
Previous page
1/74
Next page
PFS 710 D3
16 
GB
IE
Adjusting the footplate
RISK OF INJURY!
Always remove the plug from the power
socket before working on the appliance.
Adjust the footplate
according to the cutting
depth.
To do so, undo the locking lever
and move
the footplate to the corresponding position.
Lock this position by closing the locking lever
.
Stroke rate selection
Use the adjusting wheel to select the desired
stroke rate (– = lower stroke rate, + = increased
stroke rate).
The stroke rate can also be changed during opera-
tion.
Use
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation.
Switching to instantaneous operation:
Press the ON/OFF switch
. The work light
lights up when the ON/OFF switch is
pushed in slightly or fully and illuminates the
working area in low light conditions.
Switching off instantaneous operation:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
and lock it in this
position with the locking switch .
Switching off continuous operation:
Press the ON/OFF switch
and release it
again.
Guiding the sabre blade safely
To adapt to the workpiece and for safe placement,
the footplate can be swivelled. It must always
be in contact with the workpiece when the appli-
ance is running.
Practical advice on sawing
Check the material to be worked to make sure
that all foreign objects have been removed, e.g.
nails, screws, etc..
Ensure that the ventilation slits are not covered.
Switch the appliance on before moving it
towards the material to be worked.
Switch the appliance off immediately if the saw
blade jams.
Open up the sawn gap using a suitable tool
and pull out the sabre saw.
Use the appropriate saw blade and stroke rate
for the material to be worked.
Saw blades optimised for your sabre saw are
available from retail stores in different lengths
for various purposes.
Saw the material at a constant speed.
Sawing flush to edges:
Using flexible saw blades with a suitable corre-
sponding length, you can saw off protruding work-
pieces such as pipes flush to the wall.
Proceed as follows:
1. Place the saw blade directly against the wall.
2. Bend it by applying lateral pressure to the sabre
saw so that the footplate
makes contact with
the wall.
3. Switch the appliance on as described and saw
off the work piece by applying constant pres-
sure.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 295715 PFS 710 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 295715 PFS 710 D3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info