Manual Parkside IAN 292193 PDTS 6.3 A1 (page 33 of 117) (English, German, Dutch, French, Spanish)

746858

Zoom out

Zoom in

1/117

GB/IE/NI 33

Operation / Warranty and service information

Speed and vibrations must be checked every time

after maintenance and care.

The pneumatic tool should be kept and stored in

a dry room. Make sure that no moisture can enter

inside the pneumatic device.

Check regularly the spindles, threads, and

clamping mechanisms for wear, and the tolerances

for fitting abrasives.

Before all maintenance, clean the device of haz-

ardous substances that have deposited on it (during

work processes). Avoid all skin contact with these

substances. Hazardous dust coming into contact

with skin may cause serious dermatitis. Dust that is

generated or raised during maintenance work can

be breathed in.

Warranty and service

information

Creative Marketing Consulting GmbH

warranty

Dear Customer,

The warranty for this device is 3 years from the

date of purchase. In the event of product defects,

you have legal rights against the retailer of this

product. Our warranty, outlined below, does not

limit your statutory rights.

 Warranty terms

The warranty period begins on the date of purchase.

Please retain the original sales receipt. This docu-

ment is required as your proof of purchase.

Should this product have a material or manufacturing

error within three years of the purchase date, the

product will be repaired or replaced – dependent on

our choice - by us at no cost to you. This warranty

service requires that you retain proof of purchase

(sales receipt) for the defective device for the three

year period and that you briefly explain in writing

what the fault entails and when it occurred.

If the defect is covered by our warranty, we will

return the repaired device or a replacement thereof.

A repair or exchange of the device does not start a

new warranty period.

 Extent of warranty

The device has been manufactured according to

strict quality guidelines and meticulously examined

before delivery.

The warranty applies to defects in material or man-

ufacture. This warranty does not extend to product

parts which are subject to normal wear and tear

and can thus be regarded as consumable parts,

or for damages to fragile parts, e.g. switches,

rechargeable batteries, or parts made from glass.

This warranty is void if the product is damaged,

improperly used, or serviced. For proper use of the

product, all of the instructions given in the operat-

ing instructions must be followed precisely. Uses

and acts that the operating instructions dissuade or

warn against are to be avoided without question.

The product is only intended for private use and

is not for commercial use. The warranty becomes

void, in the event of misuse and improper use, use

of force, and any interference not carried out by

our authorised service branch.

 Processing of warranty

claims

Please follow the instructions below to ensure

quick processing of your claim: When inquiring

about your product please have your receipt and

product number (e.g. IAN) ready as your proof of

purchase. The product number can be found on the

type plate, an engraving, the cover page of your

instructions (bottom left), or the sticker on the back

or bottom. Should you have any functional fault

or other error, first contact the service department

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292193 PDTS 6.3 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292193 PDTS 6.3 A1 Manual

Product: