Manual Parkside IAN 292186 PDSR 6.3 A1 (page 16 of 55) (English, German, Dutch, French)

746861

Zoom out

Zoom in

1/55

GB/IE/NI

Safety instructions for pneumatic tools

 When not in use, keep pneumatic devices out

of the reach of children. Do not let anyone use

the device if they are not familiar with its use

or have not read these instructions. Pneumatic

tools are dangerous when they are used by

inexperienced persons.

 Ensure the device is cared for properly. Check

that the device’s moving parts are in perfect

working order and are not stuck or jammed.

Check that parts are not broken or damaged

in a way that stops the device from working

properly. Ensure that damaged parts have

been repaired before using the device. Many

accidents are caused by devices that have not

been properly maintained.

 Ensure that the device is switched off when not

in use.

 Wear personal protective equipment

and safety goggles at all times.

Depending on the type of pneumatic

tool and how it is used, wearing personal

protective equipment such as a dust mask,

non-slip safety shoes, a hard hat and hearing

protection can lessen the risk of injuries.

 Check all connections and supply lines. The

specifications of maintenance units, couplings

and hoses must match the rated values for the

device in terms of pressure and airflow rate.

The device will not work properly if the

pressure is too low, while excessive pressure

can cause damage and injuries.

 Ensure hoses cannot become kinked or

crushed, and keep them away from solvents

and sharp edges. Also keep hoses away from

heat, oil and rotating parts.

 Ensure that hose clamps are always properly

tightened. Loose or damaged hose clamps can

allow air to escape from the device accidentally.

 Always replace damaged hoses as soon as

possible. Defects in compressed air supply

lines can cause air hoses to whip around

uncontrollably and this can lead to injuries.

 If the power cable for this device becomes

damaged, ensure that the cable is replaced by

the manufacturer, a customer service technician

or other qualified person to avoid any possible

hazards.

 Do not use the device if you are tired or under

the influence of drugs, alcohol or medicines.

A brief moment of carelessness when using the

device can result in serious injuries.

 Do not breathe in the device’s exhaust air.

Avoid exposing your eyes to the device’s

exhaust air. The exhaust air from the pneumatic

device can contain water, oil, particles of metal

or dirt from the compressor. This can be harm-

ful to health.

TAKE CARE WHEN

SETTING DOWN THE DEVICE!

Never set the device down so that it ends up

lying on the trigger.

In the worst case, this

could cause the

device to switch itself back on

accidentally, which could result in a dangerous

situation.

 Use compatible accessories at all times. These

can be purchased from the manufacturer. Use

of third-party accessories can cause hazards.

 The compressed air source must have a filter

and regulator. Dust, corrosive fumes and/or

moisture can result in damage to the motor in

a pneumatic tool.

 The hose must be designed to handle

pressures of at least 8.6 bar or

125 psi – and never less than 150%

of the maximum pressure generated in the

system.

 The tool and intake hose must be

fitted with a hose coupling, so as to

ensure that pressure is completely

discharged when the coupling hose is

disconnected.

 DANGER! Avoid contact with a supply line

that is carrying live current. This device

provides no insulation against electric shock.

DANGER OF INJURY!

High working pressures can produce powerful

recoil forces that can in some circumstances

create hazards due to continuous stress and

strain.

 If you do not have experience with using the

device, you should seek training to ensure you

can use it safely.

292186 Unterbodenpistole_content_LB8.indb 16 05.12.17 14:14

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 292186 PDSR 6.3 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 292186 PDSR 6.3 A1 Manual

Product: