Manual Parkside IAN 291715 PSS 65 A1 (page 24 of 116) (English, German, Dutch, French, Portuguese, Spanish)

746867

Zoom out

Zoom in

1/116

2 4

G B I E

Therefore, proceed cautiously and hold



slipping which could cause your hands

to come into contact with the grinding

belt or grinding wheel.

• The workpiece gets hot during grinding.

Do not touch the machined area, allow

it to cool down. There is a risk of burn-

ing. Do not use coolants or the like.

• If you are tired or have consumed al-

cohol or tablets, do not work with the

device. Always have a break on time.

• Switch the device off and remove the

mains plug

- to loosen a blocked insertion tool,

- if the connection line is damaged or

entangled,

- in case of unusual sounds.

Residual risks

Even if properly operating and handling this

electric tool, some residual risks will remain.

Due to its construction and build, this elec-

tric tool may present the following hazards:

a) Lung damage, if suitable respiratory

protection is not worn.

b) Hearing damage, if suitable ear pro-

tection is not worn.

c) Damages to health due to

- touching the area of the grinding tool

which was not covered;

- the ejection of pieces from workpiece

or damaged grinding wheels.

d) Damage to your health caused by

swinging your hands and arms when

operating the appliance for longer pe-

riods of time or if the unit is not held or

maintained properly.

Warning! During operation, this

electric tool generates an electromag-

-

stances, may impair the functionality of

active or passive medical implants. To

reduce the risk of serious or lethal inju-

ries, we recommend that persons with

medical implants consult their doctor

and the manufacturer of their medical

implant before operating the machine.

Assembly

Caution! Risk of injury!

  

space in which to work, and that

you do not endanger other people.

- All covers and protective devices

must be assembled properly be-

fore commissioning.

- Disconnect the mains plug before

changing the setting on the device.

Setting up

-

face and fasten the device. Ideally, bolt the

drill to the surface. Use the mounting holes

for the work bench assembly ( 9) in the

baseplate for this.

The screws and nuts required for as-

sembly are not part of the scope of

delivery.

Mount the sharpener

1. Select one of the three sharpeners.

2. In order to remove a sharpener

from the working position, you

must press down the release lever

for the sharpener ( 13).

3. Remove the sharpener from the

guide rails, upwards.

4. In the storage positions, the sharp-



and left side and can be easily

removed from the guide rails.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291715 PSS 65 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 291715 PSS 65 A1 Manual

Product: