746867
23
Zoom out
Zoom in
Previous page
1/116
Next page
2 3
I EG B
Use outdoor extension leads.
When the tool is used outdoors, use
-
door use and so marked.
Stay alert, watch what you are
doing and use common sense
when operating a power tool.
Do not use a power tool while you are

alcohol or medication. A moment of
inattention white operating power tools
may result in serious personal injury.
Check damaged parts. This will
ensure that the safety of the power tool
is maintained.
- Before further use of tool, it should be
carefully checked to determine that it
will operate properly and perform its
intended function.
- Check for alignment of moving parts,
binding of moving parts, breakage of
parts, mounting and any other condi-
tions that may affect its operation.
- A guard or other part that is dam-
aged should be properly repaired or
replaced by an authorized service
centre unless otherwise indicated in
this instruction manual.
- Do not use the tool if the switch does
not turn it on and off.
Have defective switches replaced by
an authorized service centre.
There is a risk of injury.
Warning. The use of any accessory
or attachment other than one recom-
mended in this instruction manual may
present a risk of personal injury.
Have your tool repaired by a
qualied person. This electric tool
complies with the relevant safety rules.
Repairs should only be carried out by

parts, otherwise this may result in con-
siderable danger to the user..
Further Safety Instructions
Connect the device only to a power
point with a residual current protective
device (RCD) with a measured residual
current of not more than 30 mA.
 
cable away from the grinding disk and
saw chain. In the event that it is dam-
aged or severed, immediately discon-
nect the plug from the socket.
Do not touch the cable before it has
been disconnected from the mains.
Risk of electric shock.
The replacement of the plug or the
cable must be carried out by the manu-
facturer or his/her customer service in
order to avoid any hazards.
Only switch the device on once it is

For your own safety only use acces-
sories and attachments which were
stated in the operating instructions or

manufacturer.
Only use grinding wheels where the
printed rotational speed is at least as

name plate of the device.
Carry out a visual inspection of the
grinding wheel before use. Do not
use any damaged or deformed grind-
ing wheels. Replace any damaged or
worn grinding wheels.
Make sure that the sparks produced
by grinding do not present a danger,

substances.
 
grinding wheel and spark protection

hoods. There is a risk of crushing.
The rotating parts of the device cannot
be covered due to functional reasons.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291715 PSS 65 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291715 PSS 65 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info