746842
35
Zoom out
Zoom in
Previous page
1/132
Next page
PHDB 4 B2
30 
GB
IE
Self-priming from open tanks/containers and
natural water sources
Use the self-priming equipment supplied.
Intake filter
3 m reinforced suction hose
With this accessory the appliance can draw water to max. 1 m above the
water surface. This can take up to 1 minute.
Immerse the 3 m suction hose
completely underwater to get the air
out.
Connect the suction hose
to the appliance and ensure that the
intake filter
remains underwater.
Run the appliance without the hand spray gun
attached until water
flows evenly out of the high-pressure hose
.
If no water flows out after 1 minute, switch the appliance off and
check the appliance. Once the water flows, switch off the appliance
and attach the hand spray gun
and the jet pipe so you can
work.
It is important that the hose and coupling are of a good quality, tightly
fitted and that the seals are undamaged and inserted straight. Leaky
connections can impair the suction.
Bleeding the appliance
Remove the nozzle .
Start the engine (see "Starting the engine").
Pull the trigger
on the hand spray gun several times.
Allow the appliance to run until the water comes out of the jet pipe
without any air bubbles.
Switch off the appliance and screw the nozzle
back on.
Use
WARNING!
Switch off the appliance before making any adjustments or carrying
out maintenance work.
DANGER! RISK OF EXPLOSION! DO NOT SPRAY
FLAMMABLE LIQUIDS!
Place the appliance on a firm surface.
The high-pressure cleaner may not be operated by children.
(Risk of accidents due to improper use of the appliance).
The appliance generates a lot of noise.
Risk of hearing damage. Always wear suitable hearing protect when
working with the appliance.
The water jet coming out of the high-pressure nozzle exerts recoil
force on the gun. An angled jet pipe can also cause torque.
Therefore, hold the jet pipe and gun firmly in your hands.
Never aim the water jet at people, animals, the appliance itself or
electrical components.
Vehicle tyres/tyre valves may only be cleaned at a minimum spray
distance of 30 cm. Otherwise the vehicle tyres/tyre valves could
be damaged by the high-pressure jet. The first sign of damage is a
discolouration of the tyre. Damaged vehicle tyres are a source of
danger.
Materials containing asbestos or other substances that are harmful to
health may not be sprayed.
To protect the operator from water spray, wear suitable protective
clothing.
Always ensure that all hose connection are screwed tight.
The trigger of the hand spray gun must not be jammed during use.
Filling oil/petrol
When you use the appliance for the first time, unscrew the red oil inlet
screw
and add approx. 0.6 l engine oil (15W40). Use the funnel
to do this.
Unscrew the filler cap
and add standard commercial lead-free
petrol to the fuel tank
. The tank has a maximum capacity of 3.6 l.
Add fuel up to the red mark.
Starting the engine
CAUTION!
Before first use, add engine oil (15W40, approx. 0.6 l) and fuel
(regular unleaded petrol).
Check the fuel and oil levels; top up as necessary.
Provide adequate ventilation for the appliance.
Ensure that the spark plug/spark plug connector
are firmly fitted.
CAUTION!
When starting using the pull starter
there can be a kickback that
can cause injuries to your hand.
Wear protective gloves when starting.
Open the fuel tap
; to do this, move the fuel tap to the "ON"
position.
Move the On/Off switch
to the "ON" position.
Set the choke
to position I \ I (in the left position).
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291647 PHDB 4 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291647 PHDB 4 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info