Manual Parkside IAN 291647 PHDB 4 B2 (page 33 of 132) (English, German, Dutch, French, Portuguese, Spanish)

746842

Zoom out

Zoom in

1/132

PHDB 4 B2

■ 28

│

Safety devices

The safety devices are designed to protect the user and may not be de-

activated or repurposed.

Relief valve

■ If the hand spray gun is closed, the relief valve opens and the high-pres-

sure pump routes the water back to the pump suction side. This prevents

the permissible working pressure from being exceeded.

■ The relief valve is set and sealed at the factory. It may only be adjusted

by the customer service.

Safety valve

The safety valve opens if the permissible maximum allowable working

pressure is exceeded (see technical speciﬁcations); the water ﬂows out.

The safety valve is set and sealed at the factory. It may only be adjusted

by the customer service.

Thermal valve

The thermal valve protects the high-pressure pump from impermissible

warming in circulation operation if the hand spray gun is closed.

The thermal valve opens if the maximum permissible temperature of 68°C

is exceeded and drains the hot water.

Before use

NOTE

► Exercise caution when unpacking, transporting and storing due to

the high weight of the machine.

► These activities should be carried out by two people.

► Make sure that the appliance is standing on a level and ﬂat surface

while unpacking, and during assembly, storage as well as during

operation, inspection, maintenance and when at a standstill.

Fitting the handle

♦ Insert the handle A on the base frame of the device. Press the two

pushbuttons on the base frame and push the handle

A completely

until it clicks into place.

Fitting the hose holder

♦ Fit the hose holder onto the handle A by aligning the holes in the

two components.

♦ Fix the hose holder

in place on the handle A with two screws

and two nuts



(on the right side, see fold-out page).

Fitting the upper spray gun holder on the handle

♦ Use two screws , two washers and two nuts



to ﬁt the upper

spray gun holder

onto the handle A.

Fitting the lower spray gun holder on the tubular

frame

♦ Use two screws attach the lower spray gun holder onto the

tubular frame

Fitting the wheels

♦ Push a washer



onto the axle

♦ Push the axle

from outside through the wheel and place another

washer



on the axle

♦ Now guide the axle with the wheel from the outside into the tubular

frame

. Place another washer



onto the axle

and secure it in

place with the R-clip

♦ Repeat the process on the opposite side.

Fitting the rubber feet

♦ Attach the rubber feet with the screw , washer



and nuts

onto the tubular frame

Use the supplied open end wrench



and allen key



for assistance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291647 PHDB 4 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 291647 PHDB 4 B2 Manual

Product: