746842
34
Zoom out
Zoom in
Previous page
1/132
Next page
PHDB 4 B2
GB
IE
 29
Fitting the hand spray gun, the jet pipe and the
nozzle
DANGER!
Risk of injury! Appliance, supply pipes, high-pressure hose and
connections must be in perfect working order. If the equipment is
not in perfect working order, the appliance may no longer be used.
Connect the jet pipe
to the hand spray gun .
Tighten the screws of the jet pipe
by hand.
Fit the nozzle
onto the jet pipe . Ensure that it clicks into place
correctly.
Fit the high-pressure hose
onto the hand spray gun .
Operation
Checking the oil level of the engine
Check the oil level before each use.
Do not use the appliance if there is no oil visible on the dipstick .
Add oil as required. Use only engine oil (15W40).
Place the appliance on a flat, level surface and remove all dirt from
around the oil inlet/dipstick
.
Use the dipstick
to measure the oil level.
Unscrew the dipstick
and wipe it clean with a cloth.
Put the dipstick
back into the oil inlet without screwing it in.
Pull the dipstick
back out and check the oil level.
Check that the oil level is somewhere between the minimum and max-
imum levels (marked as L for low and H for high on the dipstick
).
To fill up the oil, take the supplied funnel and pour the oil slowly
into the oil inlet
. Do not overfill!
Wait a minute until the oil has settled before measuring the oil level
again as described above.
Screw the dipstick
back into the oil inlet.
CAUTION!
Do not overfill the oil. A too high oil level can cause engine damage.
The maximum fill level for the tank is 0.6 litres.
NOTE
The engine is equipped with an oil level sensor. The oil level sensor
switches the engine off if the oil level is too low and prevents a
restart. If the engine cuts out although the oil level is correct, check
whether the petrol-powered high-pressure cleaner is standing straight.
Bleeding the oil tank
CAUTION!
Before first use,
the bleed valve on the oil tank needs to be replaced.
On delivery, a black transport oil plug
is screwed in which has to
be replaced by the supplied red oil plug
.
Engine
Observe the section "Safety instructions"!
Before use, read the manufacturer's operating instructions and pay
close attention to the safety instructions.
Checking the oil level of the engine.
Do not use the appliance if the oil level has fallen below "MIN".
Add oil as required.
Fill the fuel tank
with unleaded petrol.
Do not use a 2-stroke mixture.
Adding fuel
DANGER! RISK OF FIRE AND EXPLOSION!
Never refuel in confined spaces or when the engine is running
or still hot.
Do not smoke while refuelling.
Do not use any 2-stroke mixture.
Do not refuel in the vicinity of open flames or sparks.
Do not spill fuel – use a funnel.
Wipe up any spilt fuel.
After refuelling, close the fuel canister and the tank properly.
Fill the fuel tank with unleaded petrol.
Add fuel up to the red mark.
Water connection
See technical specifications for the connection data.
Connect the supply hose (minimum length 7.5 m, minimum diameter
3/4") to the water connection on the appliance and to the water
supply (e.g. tap).
Turn on the water supply.
NOTE
The water supply hose is not included in the delivery.
Drawing water out of a container
DANGER!
Never draw water from a drinking water container.
Never prime with liquids containing solvents such as paint thinners,
petrol or oil. Atomised spray from solvent is highly flammable,
explosive and toxic.
Connect the suction hose
(diameter at least 3/4") with the filter
(accessories) to the water connection
.
MIN.
MAX.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 291647 PHDB 4 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 291647 PHDB 4 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info