746421
19
Zoom out
Zoom in
Previous page
1/74
Next page
PTBS 520 A1
16 GBIE
Before use
WARNING! RISK OF INJURY!
Always remove the plug from the power
socket before working on the appliance.
Fitting the magazine attachment
Insert the screw bit (150 mm) into the tool
holder .
Push the magazine attachment
over the
screw bit as far as the stop on the appliance.
NOTE
To make your work easier, you can also fit
the magazine attachment
offset by steps
of 45°.
Inserting the screw belt
First pull the screw belt through the lower
belt guide .
Then guide the screw belt
into the upper belt
guide until the screw belt reaches the first
audible snap-in point. Ensure that the last empty
slot before the first screw is positioned directly in
front of the screw bit .
When pressure is applied, the screw belt
is
moved on and then the first screw is positioned
in front of the screw bit.
Fitting the depth stop sleeve
Insert the screw bit (25 mm) into the bit
adapter and then into the tool holder .
Push the depth stop sleeve
over the screw
bit and the bit adapter as far as the stop
on the appliance.
Use
WARNING! RISK OF INJURY!
Always remove the plug from the power
socket before working on the appliance.
Switching on and off
During operation, you can choose between in-
stantaneous and continuous operation. Select the
required operation mode as follows:
Switching to instantaneous operation:
Press the ON/OFF switch
.
Switching off instantaneous operation:
Release the ON/OFF switch
.
Switching to continuous operation:
Press the ON/OFF switch
, keep it pressed
in and then press the lock button .
Switching off continuous operation:
Press the ON/OFF switch
and then release it.
Setting the rotation direction
Change the direction of rotation by pressing
the rotation direction switch towards the left
or right.
WARNING!
The direction of rotation may only be
changed when the device is at a standstill.
Adjusting the rotational speed
You can use the rotation speed preselector adjusting
wheel to preselect the rotational speed in preset
steps:
(− = slower speed, + = faster speed).
We recommend you carry out practice tests to
determine the correct speed.
The speed can also be changed during operation.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285766 PTBS 520 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285766 PTBS 520 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info