Manual Parkside IAN 285766 PTBS 520 A1 (page 18 of 74) (English, German, Dutch, French, Portuguese, Spanish)

746421

Zoom out

Zoom in

1/74

PTBS 520 A1

GB│IE │ 15 ■

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that can-

not be controlled with the switch is dangerous

and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are dan-

gerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may aﬀect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many acci-

dents are caused by poorly maintained power

tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations diﬀerent from those

intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replacement

parts. This will ensure that the safety of the

power tool is maintained.

Device-speciﬁc safety instructions for

magazine attachments/screwdrivers

■ Hold the appliance by the insulated handles

when you are carrying out work during which

the screws may come into contact with con-

cealed power cables or the tool’s own power

cable. If a screw comes into contact with a live

wire, this may make exposed metal parts of the

power tool live and could give the operator an

electric shock.

■ Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments or changing

accessories. Unintentional starting of power

tools is the cause of many accidents.

■ Hold the power tool ﬁrmly. High reaction

moments can occur for brief periods while

tightening and loosening screws.

■ Secure the workpiece! A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■ Wait until the power tool has come to a stand-

still before putting it down. The tool can jam,

this leading to loss of control of the power tool.

■ Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

■ Never point the power tool at yourself or

other people in the vicinity.

■ Never reach into the magazine attachment or

the screwing location during work. There is a

risk of personal injury from sharp-edged screws

or due to crushing.

■ Only use suitable screw belts as described

in the technical data. Using other screws can

damage the magazine attachment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285766 PTBS 520 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 285766 PTBS 520 A1 Manual

Product: