746434

Parkside IAN 285202 PDT 40 D3 Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
PDT 40 D3
■ 18 
│
 GB
│
IE
Maintenance by the user
Lubrication with the mist oiler:
NOTE
■
A mist oiler continuously and optimally
lubricates the compressed air stapler as a
preparation stage after the pressure reducer.
A mist oiler adds fine drops of oil to air
flowing through the appliance and therefore
guarantees regular lubrication.
♦ Install the mist oiler after the (filter) pressure
reducer. To do this, insert the plug nipple of the
mist oiler into the quick-release coupling of the
(filter) pressure reducer.
♦ Then connect the compressed air appliance
to the quick-release coupling provided for this
purpose.
Manual lubrication
NOTE
■ If you do not have a mist oiler, you must
manually lubricate after the consumption of
approximately 5000 fasteners.
♦ Apply 1–2 drops of compressed air special oil
into the threaded nipple
of the compressed
air stapler.
♦ Then pull the trigger
a few times.
CAUTION!
► Do not use too much oil, as the oil could
be ejected along with the fastener material
through the opening
and could possibly
damage the workpiece.
Cleaning
■ Do not use any sharp objects for cleaning the
appliance. Do not allow any liquids to get into
the appliance. This can damage the appliance.
■ Clean the appliance regularly, preferably
immediately after completion of the work.
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic.
■ Put the compressed air stapler in the supplied
carrying case after each use to protect it from
contamination.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities
can provide information on how to dispose of the
worn-out appliance.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285202 PDT 40 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285202 PDT 40 D3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info