746143

Parkside IAN 280250 PWS 125 D3 Manual

14
Zoom out
Zoom in
Previous page
1/114
Next page
1 4
GB IE NI
of plate and cup brushes can enlarge if
too much pressure and centrifugal force
is exerted.
Practical tips
Scrubbing wheels:
Never use a cutting wheel for
scrubbing !
The device must only be
operated with the protecti-
ve hood mounted when the
rough grinding wheel is used.
Exert only moderate pressure on the workpie-
ce. Move the device evenly back and forth.
A working angle of 30° to 40° achieves
the best results for scrub grinding.
Cutting disc:
Never use a scrubbing wheel
for cutting !
The device must only be
operated with the protective
hood mounted when the cut-
ting disc is used.
Only certied, bre-reinforced cutting or
grinding discs may be used.
In general, work with small scrubs. Exert
only moderate pressure on the workpiece.
Always work in the counter-direction. This
ensures that the device is not pushed out of
the cut through lack of control.
Assembly
Caution! Risk of injury!
- Ensure that you have sufcient
space in which to work, and that
you do not endanger other people.
- All hoods and protective devices
must be assembled properly be-
fore commissioning.
-
Disconnect the mains plug before
changing the setting on the device
Mount handgrip
The device must only be opera-
ted with the handgrip mounted.
Depending on the method of working, tigh-
ten the handgrip (
1) on to the handgrip
thread on the left (
8), right (see illustra-
tion
) or top ( 2) of the device.
Assemble/set protective hood
Adjust the protective hood such that any
sparks or detached parts cannot hit either
the user or any bystanders.
The protective hood must also be positi-
oned such that the sparks cannot ignite
combustible parts, including those in the
surroundings.
1. Press the spindle stop button
(
9).
2. Turn the mounting spindle (
17) until the spindle lock xed
the mounting spindle. Keep and
continue to hold down the spind-
le lock button (
9)
3. Release the clamping nut
(
16) with the chuck key
(
13). You can release the
spindle lock button (
9).
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280250 PWS 125 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280250 PWS 125 D3 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info