745526
11
Zoom out
Zoom in
Previous page
1/66
Next page
8
PDEXS 150 B2
GB
IE
Fitting the sandpaper disc
CAUTION!
Ensure that the appliance is disconnected
from the compressed air source before you
fit or remove a sandpaper disc
.
The sanding disc
and the supplied sandpaper
discs are equipped with matching Velcro
fasteners.
Select the sandpaper disc
with the desired
grain and press it onto the sanding disc .
Ensure that it is centred.
To change the sandpaper disc
, lift it from the
side and pull it off the sanding disc .
Clean the sanding disc as required with
compressed air.
Lubrication
NOTE
To avoid friction and corrosion damage,
regular lubrication is particularly important.
We recommend using a suitable special oil
for compressed air appliances (e.g. Liqui Moly
compressor oil).
Lubrication with mist oiler
A mist oiler (not supplied) continuously
and optimally lubricates the appliance as
a preparation stage after the pressure re-
ducer. A mist oiler gives off fine drops of
oil into the air flow and thus guarantees
a regular lubrication.
Manual lubrication
If you do not have a mist oiler, lubricate
the appliance before every use or longer
work sessions by dripping 3–4 drops of
special oil for compressed air appliances
into the connector nipple
.
Refilling oil
To ensure that the compressed air-powered random
orbital sander remains operational for as long as
possible, make sure that there is sufficient pneu-
matic oil in the appliance.
The following options are available:
Attach a maintenance unit with an oiler to the
compressor.
Install a fitted oiler into the compressed air line
or the compressor.
Add 3–5 drops of pneumatic oil into the con-
nector nipple
every 15 minutes of operation.
Connecting to a compressed air source
NOTE
Before connecting the compressed air source
the correct working pressure (3–6 bar)
must be fully reached
make sure that the trigger is in the upper
position
Attach the appliance to a compressor by con-
necting the connector nipple
with the supply
hose of the compressed air source.
To ensure that you can regulate the air pressure,
the compressed air source must be equipped
with a pressure reducer.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275679 PDEXS 150 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275679 PDEXS 150 B2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info