745526
10
Zoom out
Zoom in
Previous page
1/66
Next page
7
PDEXS 150 B2
GB
IE
Before use
NOTE
The sander may only be operated on
cleaned, oil-atomised compressed air and
may not exceed the maximum operating
pressure of 6.3 bar at the appliance. The
compressor must be fitted with a pressure
reducer to regulate the working pressure.
Wind the Teflon tape
supplied around all
threaded connectors.
Fitting the connector nipple
Remove the plastic protective cap from the
appliance's air inlet.
Wrap the threads on the connector nipple
with the Teflon tape supplied.
Screw the connector nipple
into the air inlet.
Fitting the sanding disc
The compressed air-powered random orbital sander
is equipped with a protective cuff .
Rotation direction indicator of the
sanding disc
To fit or replace the sanding disc invert the
protective cuff (see Fig. 1).
Fig. 1
WARNING!
Never operate the compressed air-powered
random orbital sander without the protective
cuff
.
Never operate the compressed air-powered
random orbital sander with an inverted
protective cuff .
A damaged protective cuff should be
replaced immediately.
Turn the spindle lock
with the knurled bulge
towards the flat side of the eccentric spindle
(see Fig. 2).
Fig. 2
Remove the protective cap from the threaded
rod of the sanding disc
and screw it clock-
wise into the eccentric spindle as far as the
stop.
Undo the spindle lock
so that the eccentric
spindle can turn freely on its own axis.
CAUTION!
Never operate the compressed air-powered
random orbital sander with a locked drive
spindle. This is dangerous and can result in
serious injuries.
Evert the protective cuff
again (see Fig. 3).
Fig. 3
Selecting a sandpaper disc
Removal and surface:
The material removal rate and surface quality are
determined by the grain strength of the sandpaper.
Please note that you can use sandpapers with
various grain sizes for working the different
materials.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275679 PDEXS 150 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275679 PDEXS 150 B2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info