Manual Parkside IAN 275390 POF 1200 B2 (page 15 of 80) (English, German, Dutch, Danish)

745935

Zoom out

Zoom in

1/80

NIIEGB

The template must be at least as

high as the ball race (26) of the

template guide (25).

Milling with centring tip

By means of the centring tip, you can do

circular milling work.

1. Turn the parallel stop (24) around

so that the stop edge points up.

2. Screw on the centring tip (23)

on the parallel stop by means of

the buttery nut. In the process,

counter lock the centring tip in

the long hole of the combination

wrench

(

27).

3. Screw the guide bars (29) of the

parallel stop (24) on the base-

plate (10) and tighten the retain-

ing screws (9).

4. Push the centring tip (23) in the

marked centre of the circle to be

cut.

5. Move the machine circularly once

in the circle around the centring

tip (23).

Cleaning/maintenance

Ask our service centre to carry out

any work that is not described in

these instructions. Use only original

parts. In this way you avoid dam-

age to the appliance and possible

injury to people.

Pull out the power plug before car-

rying out any work on the equip-

ment. There is a risk of electrocution

or of injury from moving parts.

1. Insert the parallel stop (24) with

the guide bars (29) into the guide

rails (15) of the baseplate (10).

Tighten the retaining screws (9).

2. Move the turned on machine

along the workpiece edge with

lateral pressure on the parallel

stop (24).

Milling with template guide

By means of the template guide (25), you

can transfer contours from templates to

workpieces.

Inserting the template

guide:

1. Screw off the suction adapter as

applies.

2. Insert the template guide (25) into

the sliding plate (11). The ball

race (26) must point down.

3. Fasten the template guide (25)

to the recessed head screws (21)

that are included in the delivery.

Inserting the cutter:

4. Insert a cutter that has a diameter

smaller than the inner diameter of

the template guide (25).

5. Set the desired cutting depth (see

“Initial operation”).

Milling with template guide

6. Loosen the clamping lever

(

19) and lower the machine

downward until the previously set

cutting depth is reached.

7. Move the machine with protrud-

ing template guide (25) along the

template. Apply slight pressure

during this work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275390 POF 1200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 User Manual - French, Italian - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275390 POF 1200 B2 Manual

Product: