Manual Parkside IAN 275390 POF 1200 B2 (page 13 of 80) (English, German, Dutch, Danish)

745935

Zoom out

Zoom in

1/80

NIIEGB

3. Release the locking screw (18) on

the depth limit (17).

4. Loosen the clamping lever (19)

by pushing it upward.

5. Slowly press down the machine

until the cutter contacts the work-

piece.

6. Fasten the clamping lever (19) by

pushing it to the left.

Rough adjustment:

7. Slide the depth stop (17) down-

ward until it rests on the step limit

(14).

8. Adjust the depth stop (17) to the

desired cutting depth and tighten

the locking screw (18).

Fine adjustment:

9. For the ne adjustment, turn the

rotary knob (2) to the desired

measure, wherein one complete

rotation equals 1 mm:

counter-clockwise rotation: great-

er cutting depth

clockwise rotation: lesser cutting

depth

10. After the ne adjustment, you can

set the scale below the rotary

knob (2) to the “0” position. For

this purpose, press the ring (2a)

below the rotary knob downward

and turn it into the desired posi-

tion.

We recommend testing the cutting

depth adjustment by means of a test

cut on a reject piece.

Gradual milling

To mill in multiple steps with greater cutting

depth, the cutting depth can be adjusted

with the step limit (

14).

1. Turn the step limit ( 14) so that it

engages in the highest step below the

depth stop (

17).

2. Set the further cutting depth with the

lower steps of the step limit ( 14).

Operation

Wear breathing protection

(ne dust mask of protection class

PPP2).

Switching on and off

1. Connect the machine to the pow-

er supply.

Make sure that the net voltage

matches the voltage rating indi-

cated on the device’s type plate.

2. Switching on: Keep the safety

lock (5) pressed and press the

on/off switch (6). Then release

the safety lock.

3. Switching off: Release the on/off

switch (6).

Pre-selecting the rotation

speed

You can pre-select the maximum rotation

speed on the handwheel for the rotation

speed pre-selection (

3). The on/off

switch (

6) can only be pressed up to

the specied speed.

• Adjust the desired rotation speed on

the handwheel for the rotation speed

preselection (

3).

1-2 = low rotation speed

3-4 = medium rotation speed

5-7 = high rotation speed

The suitable rotation speed is pre-selected

depending on the work material, the cutter

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275390 POF 1200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 User Manual - French, Italian - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275390 POF 1200 B2 Manual

Product: