745935
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
GB IE NI
type and the work conditions. With large
cutter diameters and hard workpieces,
choose lower rotation speeds and with
small cutter dimensions and soft workpiec-
es choose higher rotation speeds.
The best way to nd the suitable rotation
speed is a test milling.
Never adjust the rotation
speed during milling. Risk of
injury!
Practical tips
Milling
Always mill in counter direction: in
the process, the machine is moved
counter to the rotation direction of
the cutter.
(a)
(b)
Never mill in the rotation di-
rection (synchronous opera-
tion). There is the risk of ac-
cidents, as the machine might
be torn out of your hands.
Use only the cutter that has a specied
permissible rotation speed, which is at
least as high as the maximum rotation
speed of the machine that is specied
on the machine.
Always use the proper tools.
Do not use any blunt or damaged tools
or accessories.
Lead the power cable always towards
the back and away from the machine
during the milling.
1. Fasten the workpiece securely on the
work surface.
2. Insert the cutter.
3. Set the desired cutting depth and rota-
tion speed.
4. Turn the machine on.
5. Loosen the clamping lever ( 19) and
slowly press the machine downwards
until it sits on the depth stop (
17).
Fasten the machine again using the
clamping lever.
6. Hold the machine tightly with both
hands while working and mill with an
even feed.
7. After work, loosen the clamping lever
( 19) and move the machine up-
ward.
8. Turn off the device.
Edge and prole cutting
a
When edge or prole cutting with-
out parallel stop, the cutter must be
equipped with a stop ring (a) as
guide.
1. Move the turned on machine to the
workpiece until it sits on the stop ring
on the workpiece edge to be pro-
cessed.
2. Move the machine with both hands
along the workpiece edge. Avoid ex-
cessive pressure.
Milling with parallel stop
You can mill notches and proles with the
parallel stop by moving the parallel stop
along the workpiece edge at a pre-set
distance.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275390 POF 1200 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275390 POF 1200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 User Manual - French, Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info