Manual Parkside IAN 275082 PHD 100 E2 (page 9 of 76) (English, German, Dutch, Danish, French)

745531

Zoom out

Zoom in

1/76

IEGB

be replaced by the manufac-

turer, a customer service agent

of the same or a similarly quali-

ed person in order to prevent

hazards.

• Do not pull the plug from the

socket by the cable. Protect the

cable from heat, oil and sharp

edges.

• Do not carry or x the equip-

ment by the cable.

• Use only extension cables that

are protected from spray water

and designed for outdoor use.

Always fully unroll a cable

drum before use. Check the ca-

ble for damage.

• Before any work on the equip-

ment, during work breaks and

in the case of non-use, remove

the plug from the socket.

• The cross-section of the power

supply cable must not be less

than 2x2,5mm².

• Wear sturdy footwear to protect

against electric shock.

Initial Operation

In keeping with current regulations

a pressure washer must never be

operated off the drinking water

mains supply without a controlla-

ble backow preventer. A suitable

backow preventer in conformity

with EN 12729 type BA must be

used.

Water that has passed through a backow

preventer is classied as undrinkable.

A backow preventer is available

from specialist retailers.

• Employ an ordinary garden hose for

the water intake and ensure sufcient

length.

Setting up

• Insert the accessory holder

(6) into the attachment on the

reverse-side of the device (see

small image).

• Screw the equipment side of the

high-pressure hose connection

(2) to the high-pressure hose con-

nection (3) on the equipment.

• Insert the high-pressure connec-

tion on the gun side (1) into the

spray gun (10).

• Establish the water supply by

connecting the rapid-action wa-

ter supply connector to the water

connection with sieve insert

(

9).

• Connect to the spray gun (10)

by inserting and screwing in the

jet tube (11).

• If the jet pipe (11) is tted, screw

in with the jet pipe (11) to con-

nect either the adjustable fan

nozzle (12) or the high pressure

nozzle (13).

• Screw in to connect the deter-

gent container with nozzle (

14) directly to the spray gun

(10). With using the cleaning

agent container with the noz-

zle (

14), pour only cleaning

agent into the container. It is

sucked in automatically.

The width of the jet can be increased by

turning the end of the nozzle to the left. To

reduce the width of the jet, turn the end of

the nozzle to the right.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275082 PHD 100 E2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275082 PHD 100 E2 Manual

Product: